Hi everyone ,I am looking for some help getting a safe Stage 1 base map for my 2000 Audi A4 B5 Quattro Avant with the 1.8T ATW engine code and a Tiptronic automatic transmission. I successfully read my factory ECU and have attached my stock .bin file to this post. I am also using the community 4B0906018P ATW.xdf file in TunerPro, which aligns perfectly with my software version. Here are my exact ECU and vehicle details: ECU Part Number: 4B0906018Q (Reads as 4B090601Q) [1]Bosch HW/SW Number: 0261206538Transmission: 5-Speed Tiptronic Automatic. Current Supporting Mods: catless downpipe straight all the way back, 2.0 coils, cold air intake, big intercooler, arphead studs, 034 motorsport compression lowering headgasket, stock injectors, stock fuel pump, ko3s turbo, boost guage,  Since this is a Tiptronic car, I want to make sure the low-end torque/boost request (KFMIRL) scales smoothly to keep the automatic transmission clutch packs safe. If anyone has a verified Stage 1 binary file for this box, or would be willing to apply a safe baseline calibration to my attached stock file, I would greatly appreciate the help!


Thank you!