Pages: [1]
Author Topic: AUM just with 3 inch maf and s3 injectors (383@3bar)  (Read 6141 times)
Vdub-dub
Full Member
***

Karma: +4/-1
Offline Offline

Posts: 136


« on: September 07, 2012, 03:51:52 PM »

to run AUM ecu with just 3 inch (225) maf and 225 s3 injectors just a case of copying over MLMFM and KRKTE over? or im i missing something?


both me7.5.5
Logged
littco
Hero Member
*****

Karma: +52/-7
Offline Offline

Posts: 903


« Reply #1 on: September 09, 2012, 06:54:27 AM »

I also did tvub, temin, which seemed to work fine from what I can tell
Logged
vagenwerk
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 182


« Reply #2 on: March 05, 2013, 10:37:12 AM »

How about KFKHFM ? Is there small difference about somewhere to 7% in values between KFKHFM  in Bam and AUM file ?
Should it be also copied ?
Logged
littco
Hero Member
*****

Karma: +52/-7
Offline Offline

Posts: 903


« Reply #3 on: March 05, 2013, 10:51:03 AM »

How about KFKHFM ? Is there small difference about somewhere to 7% in values between KFKHFM  in Bam and AUM file ?
Should it be also copied ?
yes,

To be honest I've just run the 018cb file on the AUM Ecu without any issue.. Just delete the EGT and everything else is good...
Logged
Bische
Sr. Member
****

Karma: +25/-4
Offline Offline

Posts: 397



WWW
« Reply #4 on: March 05, 2013, 08:16:07 PM »

If copying, might want to have FKKVS also  Smiley
Logged
vagenwerk
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 182


« Reply #5 on: March 06, 2013, 03:38:00 PM »

If copying, might want to have FKKVS also  Smiley

I only swap 3inch Maf to standard AUM file should i also have to copy FKKVS ? i run on standard 320cc injectors.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 17 queries. (Pretty URLs adds 0s, 0q)