bhp4ever
Newbie
Karma: +0/-0
Offline
Posts: 1
|
|
« Reply #60 on: October 19, 2014, 02:31:35 PM »
|
|
|
PLEASE NOTE...THIS IS NOT MY WORK...
So here is fully disclosed version. It worked on 2.0TDI engine but sure if will work on others.
Tprot patch
To be able to flash files trough OBD in Tuning Protected ECU's such as EDC17 all yuo need to do is:
1 - Read full ecu in bootmode 2 - Open file in hex editor 3 - Find in Hex following string "3C2B" It usually appears very close to the beginning of the file not in the map area. 4 - Replace with "OOOO" 5 - Flash modified file back in bootmode 6 - You can now flash maps trough OBD. RSA signature check is bypassed.
|
|
|
Logged
|
|
|
|
TCSTigersClaw
|
|
« Reply #61 on: October 19, 2014, 11:36:20 PM »
|
|
|
I would not recommend doing anything to MED/EDC 17 manually , they are very different from ME7.5 MED9 and I have seen a lot of trouble and changes with simple Factory Updates.
OTP areas CAN be re-written with tools like VAS and also recently I came upon a TPOT3 MED17 that wasnt able to be patched because of a recent Dealer Update (1.4 TSI) .
Anyway the bottom line is ,don`t bother to do anything without a tool ,these ECU`s are expensive :/
|
|
|
Logged
|
VAG cars newbie tuner
|
|
|
prj
|
|
« Reply #62 on: February 20, 2015, 12:57:21 AM »
|
|
|
Volvo EDC17CP48 can be done by X17 now.
|
|
|
Logged
|
|
|
|
k0mpresd
|
|
« Reply #63 on: February 20, 2015, 08:33:44 AM »
|
|
|
med17.5.2 vr/w/chk via obd now too.
|
|
|
Logged
|
|
|
|
_mumin_
Jr. Member
Karma: +2/-0
Offline
Posts: 46
|
|
« Reply #64 on: February 21, 2015, 10:08:37 AM »
|
|
|
med17.5.2 vr/w/chk via obd now too. Upon my request
|
|
|
Logged
|
|
|
|
salex
Newbie
Karma: +0/-0
Offline
Posts: 8
|
|
« Reply #65 on: February 21, 2015, 10:15:44 AM »
|
|
|
it was high time!
|
|
|
Logged
|
|
|
|
_mumin_
Jr. Member
Karma: +2/-0
Offline
Posts: 46
|
|
« Reply #66 on: February 21, 2015, 10:29:41 AM »
|
|
|
it was high time!
Yes it was , but i had answer from MMS that no one requested this protocol before BTW . MPPS also added Med17.5.2 by OBD but i haven't tested it successfully ... X17 works ok - tested
|
|
« Last Edit: February 23, 2015, 11:19:16 PM by _mumin_ »
|
Logged
|
|
|
|
terminator
|
|
« Reply #67 on: February 21, 2015, 03:38:03 PM »
|
|
|
BTW . MPPS also added Med17.5.2
via OBD???
|
|
|
Logged
|
|
|
|
tabster
Newbie
Karma: +1/-0
Offline
Posts: 15
|
|
« Reply #68 on: February 22, 2015, 01:17:24 PM »
|
|
|
Yes it was , but i had answer from MMS that no one requested this protocol before BTW . MPPS also added Med17.5.2 but be careful it crashed my ecu ... X17 works ok - tested MPPS protocol only works if you have made "Unlock" by boot beforehand.
|
|
|
Logged
|
|
|
|
_mumin_
Jr. Member
Karma: +2/-0
Offline
Posts: 46
|
|
« Reply #69 on: February 23, 2015, 11:22:08 PM »
|
|
|
MPPS protocol only works if you have made "Unlock" by boot beforehand.
Yes , i have removed TPROT first , but it hasn't worked for me ... i got reply from AMT that i should use golf med17.5.2 instead of scirocco that i used. I have to test this.
|
|
|
Logged
|
|
|
|
tabster
Newbie
Karma: +1/-0
Offline
Posts: 15
|
|
« Reply #70 on: February 28, 2015, 06:43:01 AM »
|
|
|
Under Scirocco is the general " ALL TFSI MED17" protocol. Use the one listed as MED17.5.2 shown here:
|
|
|
Logged
|
|
|
|
nano
Newbie
Karma: +1/-1
Offline
Posts: 19
|
|
« Reply #71 on: March 09, 2016, 05:21:12 AM »
|
|
|
PLEASE NOTE...THIS IS NOT MY WORK...
So here is fully disclosed version. It worked on 2.0TDI engine but sure if will work on others.
Tprot patch
To be able to flash files trough OBD in Tuning Protected ECU's such as EDC17 all yuo need to do is:
1 - Read full ecu in bootmode 2 - Open file in hex editor 3 - Find in Hex following string "3C2B" It usually appears very close to the beginning of the file not in the map area. 4 - Replace with "OOOO" 5 - Flash modified file back in bootmode 6 - You can now flash maps trough OBD. RSA signature check is bypassed.
do you mean that with tprot of RSA data is not checked by ecu? only need a checksum like old ecu?
|
|
|
Logged
|
|
|
|
|