Pages: [1]
Author Topic: Throttle Plate Angle  (Read 4087 times)
masterj
Hero Member
*****

Karma: +62/-5
Offline Offline

Posts: 1049



WWW
« on: October 22, 2012, 02:40:48 PM »

Hello, guys!
Can someone tell me their usual tp angle in vag com (vcds) group 60 when doing adaptation? Mine seems to be always ~84%, which i think is strange. Also I can't really understand why at idle I have -25% lambda correction, while at wot it is pretty much OK -+5%...
I read that jtorres had similar problem and found that his TB was the cause (http://nefariousmotorsports.com/forum/index.php?topic=2610.msg25579#msg25579). Can someone tell me how to diagnose this with me7logger?

BTW: There's always a drop of RPM (~100) if I step on the gas from complete stop before going back up so I thought it might be tp or tp sensor dying... Temporarily my lambda correction is fixed by setting FKKVS to 0.75 at low values, but I still get RPM drop unless I do improvised launch control...
Logged

AARDQ
Sr. Member
****

Karma: +11/-0
Offline Offline

Posts: 338


« Reply #1 on: October 22, 2012, 03:10:36 PM »

~84% and 14% are correct.  100% is available when on the road, though.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.011 seconds with 16 queries. (Pretty URLs adds 0s, 0q)