Dev Blog
Forum
Wiki
About
NefMoto
>
Technical
>
Data Logging
>
Took my first logs with the vag, need help understanding
Pages: [
1
]
« previous
next »
Author
Topic: Took my first logs with the vag, need help understanding (Read 4704 times)
longliveaudi
Newbie
Karma: +0/-0
Offline
Posts: 7
Took my first logs with the vag, need help understanding
« on: October 30, 2012, 02:45:51 AM »
Im stage 3, was hitting 24 psi before front o2 sensors fail'd, then when i installed both front new o2 senors i peak at 13-14 psi WOT with lots of misfires.. if i hold boost.
Im not to sure what im looking for but as you can see i pull up these logs and codes from vag com. yes i have deleted them many times and they come right back on after 5 min of driving. What else should i log and is there a chart i can compare numbers.
16534 - Oxygen (Lambda) Sensor B2 S1
P0150 - 35-10 - Malfunction in Circuit - Intermittent
16514 - Oxygen (Lambda) Sensor B1 S1
P0130 - 35-10 - Malfunction in Circuit - Intermittent
15:44:45 Group 030: Lambda Control (Sensor Status)
111 Bank 1 Sensor 1
100 Bank 1 Sensor 2
111 Bank 2 Sensor 1
100 Bank 2 Sensor 2
15:44:45 Group 031: Lambda Control
0.050 V Bank 1 Sensor 1 (actual)
0.000 V Bank 1 Sensor 1 (specified)
0.075 V Bank 2 Sensor 1 (actual)
0.000 V Bank 2 Sensor 1 (specified)
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Address 01: Engine (8D0 907 551 M)
15:45:56 Group 001: General
880 /min Engine Speed (G28)
94.0°C Coolant Temperature (G62)
25.0 % Lambda Control Bank 1
19.5 % Lambda Control Bank 2
15:45:56 Group 030: Lambda Control (Sensor Status)
111 Bank 1 Sensor 1
100 Bank 1 Sensor 2
111 Bank 2 Sensor 1
100 Bank 2 Sensor 2
15:45:56 Group 031: Lambda Control
0.060 V Bank 1 Sensor 1 (actual)
0.000 V Bank 1 Sensor 1 (specified)
0.135 V Bank 2 Sensor 1 (actual)
0.000 V Bank 2 Sensor 1 (specified)
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Address 01: Engine (8D0 907 551 M)
15:46:05 Group 001: General
880 /min Engine Speed (G28)
94.0°C Coolant Temperature (G62)
25.0 % Lambda Control Bank 1
18.0 % Lambda Control Bank 2
15:46:05 Group 030: Lambda Control (Sensor Status)
011 Bank 1 Sensor 1
100 Bank 1 Sensor 2
111 Bank 2 Sensor 1
100 Bank 2 Sensor 2
15:46:05 Group 031: Lambda Control
0.060 V Bank 1 Sensor 1 (actual)
0.000 V Bank 1 Sensor 1 (specified)
0.070 V Bank 2 Sensor 1 (actual)
0.000 V Bank 2 Sensor 1 (specified)
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Address 01: Engine (8D0 907 551 M)
15:49:25 Group 001: General
880 /min Engine Speed (G28)
93.0°C Coolant Temperature (G62)
25.0 % Lambda Control Bank 1
19.5 % Lambda Control Bank 2
15:49:25 Group 033: Lambda Control
25.0 % Lambda Control Bank 1 Sensor 1
0.065 V Sensor Voltage Bank 1 Sensor 1
18.0 % Lambda Control Bank 2 Sensor 1
0.635 V Sensor Voltage Bank 2 Sensor 1
15:49:25 Group 035: Lambda Control (Lambda Sensor Aging - Bank 2 Sensor 1)
880 /min Engine Speed (G28)
330.0°C Catalytic Converter Bank 2 Temp.
0.00 s Dynamic Factor Bank 2 Sensor 1
Test OFF Result Lambda Aging
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Address 01: Engine (8D0 907 551 M)
15:53:58 Group 001: General
880 /min Engine Speed (G28)
92.0°C Coolant Temperature (G62)
0.0 % Lambda Control Bank 1
0.0 % Lambda Control Bank 2
15:53:58 Group 033: Lambda Control
0.0 % Lambda Control Bank 1 Sensor 1
0.025 V Sensor Voltage Bank 1 Sensor 1
0.0 % Lambda Control Bank 2 Sensor 1
0.035 V Sensor Voltage Bank 2 Sensor 1
15:53:58 Group 035: Lambda Control (Lambda Sensor Aging - Bank 2 Sensor 1)
880 /min Engine Speed (G28)
395.0°C Catalytic Converter Bank 2 Temp.
0.00 s Dynamic Factor Bank 2 Sensor 1
Test OFF Result Lambda Aging
Logged
longliveaudi
Newbie
Karma: +0/-0
Offline
Posts: 7
Re: Took my first logs with the vag, need help understanding
« Reply #1 on: October 31, 2012, 12:57:03 PM »
Can you close thread, i dont want someone to reply and get mad cuz i never look at this thread anymore
Logged
Pages: [
1
]
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General
-----------------------------
=> Introductions
=> General Discussion
-----------------------------
Noob Zone
-----------------------------
=> Noob Questions
=> Noob Guides and FAQs
-----------------------------
Technical
-----------------------------
=> NefMoto Software
=> Tuning
===> Documents & Helpers & How To's
===> Community Projects
=> Diagnostics
=> Flashing and Chipping
=> Cluster and Immobilizer
===> ECU EEPROM images
===> Original Cluster dumps
===> Original Cluster dump requests
=> Data Logging
=> Reverse Engineering
=> Communication Protocols
-----------------------------
ECU Files
-----------------------------
=> ECU Definition Files
===> ECU Definition File Requests
=> Original ECU Files
===> Original ECU File Requests
=> Checksum Update Requests
-----------------------------
Vehicles
-----------------------------
=> Vehicle Tech
=> Project Cars
-----------------------------
Regional
-----------------------------
=> Canadian Regional Discussion
=> US Regional Discussion
-----------------------------
Classifieds
-----------------------------
=> For Sale
=> Wanted
=> Services
-----------------------------
Miscellaneous
-----------------------------
=> Off Topic
=> Forum Tech Support
=> Bizarro Messages Posted by Bots and Spammers
Navigation
Home
Help
Login
Register
Personal Tools
November 26, 2024, 08:19:28 AM
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Search
Advanced Search
Loading...