Pages: 1 [2]
Author Topic: Anti overun fuel cut - try it here  (Read 28660 times)
mushtafa
Full Member
***

Karma: +3/-4
Offline Offline

Posts: 121


« Reply #15 on: November 08, 2014, 06:12:57 AM »

Tried this today, doesn't seem to work for me, when looking at injector time, it's still going to 0ms on overrun.
Logged
mushtafa
Full Member
***

Karma: +3/-4
Offline Offline

Posts: 121


« Reply #16 on: November 08, 2014, 07:45:34 AM »

I just rechecked the file after checksum correction, can anyone confirm I've done this right?

Address 1126C was 0, changed to 1.

Thanks
Logged
majsterx
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 15


« Reply #17 on: October 01, 2015, 05:41:18 AM »

i have 2.7T with tiptronic so needed check this out.

KFNWEG map looks ok so should be work's
CWSAWE switched on.

attached  location if some one will be looking for it. (Different from others)
I put video after test.


Logged
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.02 seconds with 17 queries. (Pretty URLs adds 0s, 0q)