Could we substitue one or more of the less used channels/variable in TKMWL (unisettings) with some more useful variables from VS_VERST?

i.e.
make the unisettings channel 11 (unused) to adjust VS_VERST 16: vsrlmx or 17: vsldtv ?


Use VCDS with UNISETTINGS functionality« on: November 07, 2012, 05:36:04 AM » - by masterj



maybe as simple as repointing where vsrlmx is reference in LDRLMX to location of vstrlx and then addressing where vstrlx was originally referenced from.

Thanks,
Rey

With ME7 just get a real time emu and be done with it.

Well your other option is to modify code to read or write that value from EEPROM or RAM and after that write the EEPROM or RAM over diagnostics.

Worth it? Hardly when you can get an emulator for 500$.

Or get the calibration interface working...

You are assuming that channel 11 or whatever will have the same characteristics as vsrlmx.

Always good to be thinking outside the box.

I'll take a quick peek next chance I get.

(address references from the old Audi TT def)

TKMWL channel 12
12: vstrlx_byte_380AE6 - 0xFF

var reference:

VS_VERST vsrlmx reference:

So, this is what I propose.... Hard code the vstrlx reference to 1 (mulu by 1: C2 F4 E6 8A -> C2 F4 FF 00 )
and repoint the vsrlmx reference to vstrlx_byte_380AE6 (D2 F4 A2 88 -> D2 F4 E6 8A)

So, I'm adding vstrlx to rlmax instead of mulu. That will allow the ability to increase rlmax from unisetting/vagcom not just scale down.

Thoughts?