Pages: [1]
Author Topic: Med9 pin out ???  (Read 5672 times)
Vdub-dub
Full Member
***

Karma: +4/-1
Offline Offline

Posts: 136


« on: December 21, 2012, 11:53:24 PM »

Just bought a cheap med9 ecu to have a little play with what's pin out for connecting mpps lead or bdm ?? Can it be put into boot mode like me7 totally new to this ecu so need some direction pls
Logged
msundercober
Jr. Member
**

Karma: +3/-0
Offline Offline

Posts: 46


« Reply #1 on: December 22, 2012, 02:38:59 AM »

BDM is the best way to read and write MED9.
Logged
Vdub-dub
Full Member
***

Karma: +4/-1
Offline Offline

Posts: 136


« Reply #2 on: December 22, 2012, 03:57:08 AM »

BDM is the best way to read and write MED9.

Take it only direct to board with bdm??

Could mpps lead not do beach flash ?
Logged
rob.mwpropane
Sr. Member
****

Karma: +32/-0
Offline Offline

Posts: 370


WWW
« Reply #3 on: December 22, 2012, 06:48:49 AM »

Take it only direct to board with bdm??

Could mpps lead not do beach flash ?

I have no experience with BDM yet, but MPPS does not do bench as it does with ME7. Anyway here's a good read. It includes the pinout your looking for as well.

http://nefariousmotorsports.com/forum/index.php?topic=818.0
Logged

This has nothing to do with cars but you can see my glorifying job at,

www.MWPropane.com
Vdub-dub
Full Member
***

Karma: +4/-1
Offline Offline

Posts: 136


« Reply #4 on: December 24, 2012, 08:45:18 AM »

Many thanks did read that link once but forgot about it and couldnt find it in a search
, but all done now via BDM100 and dimsport software (after few hours messing about to find power lead was no good)

posted the orginal file(s) from it in orignal file section
thanks
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 16 queries. (Pretty URLs adds 0s, 0q)