Pages: [1]
Author Topic: Tuning Help  (Read 5209 times)
vdubnation
Turboman
Global Moderator
Sr. Member
*****

Karma: +49/-2
Offline Offline

Posts: 433


« on: January 19, 2013, 08:21:46 PM »

What do you guys think of my logs from my




« Last Edit: February 15, 2013, 12:36:57 PM by vdubnation » Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12270


WWW
« Reply #1 on: January 19, 2013, 09:44:53 PM »

Something very screwy with your wgdc. first log its at 10% all the way across. 2nd log, its obviously way too low.

Also you have some issues with your timing table. You can see you are dropping 15 deg+ timing when load hits 160.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
vdubnation
Turboman
Global Moderator
Sr. Member
*****

Karma: +49/-2
Offline Offline

Posts: 433


« Reply #2 on: January 19, 2013, 09:55:41 PM »

thanks man

anything else look screwy
Logged
vdubnation
Turboman
Global Moderator
Sr. Member
*****

Karma: +49/-2
Offline Offline

Posts: 433


« Reply #3 on: January 19, 2013, 10:18:31 PM »

forgot to mention at the time of these logs i was running on my manual boost controller with the n75 valve in but not wired up
Logged
vdubnation
Turboman
Global Moderator
Sr. Member
*****

Karma: +49/-2
Offline Offline

Posts: 433


« Reply #4 on: January 30, 2013, 12:36:59 PM »

new logs how am i looking
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12270


WWW
« Reply #5 on: January 30, 2013, 02:14:07 PM »

Uh. Timing is still a mess

boost looks good though.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 16 queries. (Pretty URLs adds 0s, 0q)