Pages: [1]
Author Topic: MED17 Tuning  (Read 6361 times)
terminator
Sr. Member
****

Karma: +15/-4
Offline Offline

Posts: 425


« on: January 25, 2013, 10:34:41 AM »

Hi!

Could anyone explain me, what exactly maps I must to change for increasing boost pressure? I wanna make it around 2.0mBar (stock around 1.5 mbar)

The car is VW Tiguan 2.0tsi 170hp 2012 MED17.5

1. Max boost 16x1 (LDRXN)
Three the same maps, may be one of them is LDRXNZK?

2. Boost via temp (KFLDHBN) 8x8

3. Optimum torque KFMIOP (12x16) and boost KFMIRL (12x16)

4. Request Nm via accelerator (dont know ID)
Eight just a little different maps 16x9

What else I must to change? What about boost limiter via Patm?
Logged
Rick
Hero Member
*****

Karma: +63/-4
Offline Offline

Posts: 704


« Reply #1 on: January 25, 2013, 10:53:04 AM »

It isn't a diesel, you'll need a lot more than that.  Sounds like you maybe using ECU titanium.
Logged
matchew
Hero Member
*****

Karma: +47/-22
Offline Offline

Posts: 503


« Reply #2 on: January 25, 2013, 12:22:51 PM »

Please and thank you, wouldn't go a miss!
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 16 queries. (Pretty URLs adds 0s, 0q)