Repairing the me7 hardware

Pages: [1]

« previous next »

Author

Topic: Repairing the me7 hardware (Read 6595 times)

ddillenger

Hero Member

Karma: +641/-21
Offline

Offline

Posts: 5640

	Repairing the me7 hardware « on: February 01, 2013, 03:59:52 PM »

I have an ecu here that had an encryption board. Somewhere along the lines 3 of the eprom pads were lifted and epoxied. The board is pretty much beyond repair as a result. I have another m-box that suffered a bit of water damage, Ideally I'd like to be able to repair one of them, just wondering if anyone has any experience with the hardware. The water damaged ecu has a bit of corrosion on the bottom directly under one of the larger blue capacitors, but I've seen much worse. It's not powering up at the moment.


	Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM

ironital

Jr. Member

Karma: +1/-3
Offline

Offline

Posts: 39

Love what you do tell you do what you want

	Re: Repairing the me7 hardware « Reply #1 on: February 01, 2013, 05:35:18 PM »

try to read it use bench harnes


	Logged

Mohamed fouad

ddillenger

Hero Member

Karma: +641/-21
Offline

Offline

Posts: 5640

	Re: Repairing the me7 hardware « Reply #2 on: February 01, 2013, 05:39:56 PM »

No good. The ecu is not powering up. Has power going in, but when by the time it hits the large capacitor on the power side it's showing roughly 2 volts (whereas a good one shows w/e I input).


	Logged

1gcrazy

Full Member

Karma: +0/-3
Offline

Offline

Posts: 101

	Re: Repairing the me7 hardware « Reply #3 on: February 02, 2013, 03:11:04 AM »

If you head over to the DSM world: DSMTuners/DSMTalk, theres a guy on one of those forums named "Steve". Thats his screenname from what I remember, if he isn't directly the guy to talk to about fixing broken traces and tracking down ridiculously difficult ECU problems, he knows who to talk to. I know it's a 'go talk to the guy on that one street corner' scenario but really... if I need to I can put you two in contact of one another...


	Logged

1gcrazy

Full Member

Karma: +0/-3
Offline

Offline

Posts: 101

	Re: Repairing the me7 hardware « Reply #4 on: February 02, 2013, 03:14:22 AM »

http://simon.chi.il.us/ECU/

DSMTuners...


	Logged

ddillenger

Hero Member

Karma: +641/-21
Offline

Offline

Posts: 5640

	Re: Repairing the me7 hardware « Reply #5 on: February 02, 2013, 03:19:34 AM »

Thanks. I'll shoot him an email (I actually had visited his site and checked out the before and after pics in the past). I'm not holding out too much hope though, the inside of a dsm ecu is infinitely less complicated.

I appreciate it.


	Logged

ddillenger

Hero Member

Karma: +641/-21
Offline

Offline

Posts: 5640

	Re: Repairing the me7 hardware « Reply #6 on: February 06, 2013, 10:19:59 AM »

soooo, I've checked just about every component on the board against a known good ecu. Can't find anything wrong (other than the lack of power). Capacitors are all good, I actually pulled them and tested them before reinstalling. I'm at a loss!


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 26, 2024, 11:22:08 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search