Pages: [1]
Author Topic: adding nls and antilag lc.  (Read 4542 times)
Normohl
Newbie
*

Karma: +0/-3
Offline Offline

Posts: 23


« on: February 07, 2013, 04:17:03 PM »

trying to implement the nls and aintlag code into my tune, I have changed all the variables listed on the wiki until it gets to the part where it tells you to add the code to the empty space 0x8E800 to 0x8E88D but when I go to hex edit it in it goes from 0x8E800 to 0x8E91C so its a little longer than it should be? What am I doing wrong here?

9A2B1380F2F4408ED7008100F2F9007E40499D0BF2F47AF8D7008100F2F9027E4049FD03F78EAC8D0D2F9A2B29808A2B2260F2F47AF8D7008100F2F9067E4049FD1AC2F4028BD7008100C2F9087E4049FD12D7003800F2F4F04FD7008100F2F9047E40499D11F78EAC8D0841D7003800F7F8F04F0D09D7003800F68FF04F0D04D7003800F68EF04FF3F8F38ADB00

http://www.nefariousmotorsports.com/wiki/index.php/Adding_anti-lag_launch_control_and_no-lift_shift

Logged
Normohl
Newbie
*

Karma: +0/-3
Offline Offline

Posts: 23


« Reply #1 on: February 07, 2013, 04:36:23 PM »

Okay ended up using HXD hex editor and it turned out right, is there a problem with the hex editor in tuner pro?
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.012 seconds with 17 queries. (Pretty URLs adds 0s, 0q)