NefMoto > Technical > Cluster and Immobilizer (Moderator: ddillenger) > SKC confirmation
Pages: [1]
« previous next »
Author Topic: SKC confirmation  (Read 8105 times)
elewsader
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 23
« on: February 08, 2013, 01:34:24 PM »
just looking to confirm from those with more experience that I've interpreted the correct SKC out of this:

ECU.bin file pulled using VAG_K+CAN_commander_v2.5 with a generic KKL cable.

SKC should be 03016?

-Thanks!
« Last Edit: February 13, 2013, 12:06:42 PM by nyet » Logged
2003 Audi A4 1.8MTQ
ddillenger
Moderator
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640
« Reply #1 on: February 08, 2013, 03:38:14 PM »
You got it.
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
EuroXs4
Full Member
***

Karma: +15/-31
Offline Offline

Posts: 209
« Reply #2 on: November 17, 2014, 06:05:13 AM »
sorry to bring back an old thread.Can you tell me the address location of the pin?
Logged
turboat
Hero Member
*****

Karma: +45/-3
Offline Offline

Posts: 619
« Reply #3 on: November 17, 2014, 06:21:27 AM »
http://nefariousmotorsports.com/forum/index.php?topic=5068.0title=
Logged
tpzd3fq
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 8
« Reply #4 on: November 17, 2014, 06:22:51 AM »
Quote from: elewsader on February 08, 2013, 01:34:24 PM

SKC should be 03016?

D:\eeprom\et03>et03 ecu.bin
95040 Eeeprom Tool - 0.3 - No warranty implied or given, manually verify all cha
nges before saving eeprom to ECU, this tool could cause permenent damage to ECU
and prevent vehicle running

Read in 512bytes
WARNING: cannot decode VIN, try setting VIN to fix
WARNING: cannot decode ImmmoID
EEPROM Status:
- VIN:
- SKC: 03016
- Immobiliser: Error, set Immo
- Checksum: Invalid Checksum
- Size: 512bytes
- Cluster Code: 2E C0 45 13 55 64 84
- P0601 DTC: set to 00 01
- Immo ID:
- Softcoding ID: 65408
Logged
tpzd3fq
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 8
« Reply #5 on: November 17, 2014, 06:34:52 AM »
Quote from: EuroXs4 on November 17, 2014, 06:05:13 AM
sorry to bring back an old thread.Can you tell me the address location of the pin?
R u looking for sth like this?
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655
« Reply #6 on: November 17, 2014, 06:37:32 AM »
except that picture doesnt have the skc location mapped out.
Logged
tpzd3fq
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 8
« Reply #7 on: November 17, 2014, 06:48:03 AM »
Quote from: k0mpresd on November 17, 2014, 06:37:32 AM
except that picture doesnt have the skc location mapped out.
so......I found this one:-)
Logged
EuroXs4
Full Member
***

Karma: +15/-31
Offline Offline

Posts: 209
« Reply #8 on: November 23, 2014, 06:31:25 PM »
i would assume if you have the skc from the ecu using vcds to adapt you dont need workshop code or date??
Logged
turboat
Hero Member
*****

Karma: +45/-3
Offline Offline

Posts: 619
« Reply #9 on: November 24, 2014, 02:16:46 AM »
Correct. In theory at least.
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 17, 2024, 02:46:03 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.019 seconds with 17 queries. (Pretty URLs adds 0s, 0q)