NefMoto > ECU Files > ECU Definition Files > ECU Definition File Requests > Definition Request 4B0906018AA
Pages: [1]
« previous next »
Author Topic: Definition Request 4B0906018AA  (Read 7229 times)
Barks
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 34
« on: February 19, 2013, 01:17:34 PM »
Hello,

Don't suppose anyone has a definition for a 4B0906018AA (Passat 1.8t)

Cheers

Dave
Logged
littco
Hero Member
*****

Karma: +52/-7
Offline Offline

Posts: 903
« Reply #1 on: February 20, 2013, 02:56:39 AM »
Dave,

If its a 512kb file then try the 018f file that's on here.
I looked at a 6k0906032aa Ecu yesterday me7.5 512kb and the 018f works perfectly. Plus there's a full winols on here.
Logged
Barks
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 34
« Reply #2 on: February 20, 2013, 05:56:43 AM »
Hello Dan,

I haven't downloaded from the car yet, but the original here that I am using for building the XDF is 1meg:-

http://nefariousmotorsports.com/forum/index.php?topic=2564.0

I will have a look at the 018f.

Cheers
Logged
littco
Hero Member
*****

Karma: +52/-7
Offline Offline

Posts: 903
« Reply #3 on: February 20, 2013, 06:02:55 AM »
Quote from: Barks on February 20, 2013, 05:56:43 AM
Hello Dan,

I haven't downloaded from the car yet, but the original here that I am using for building the XDF is 1meg:-

http://nefariousmotorsports.com/forum/index.php?topic=2564.0

I will have a look at the 018f.

Cheers

Says its 512kb. I think the 018f will flash on or at least you can use it to cross match
Logged
Barks
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 34
« Reply #4 on: February 21, 2013, 12:36:14 PM »
I will download the one of the car in question,

cheers
Logged
prj
Hero Member
*****

Karma: +1072/-483
Offline Offline

Posts: 6039
« Reply #5 on: February 21, 2013, 05:19:18 PM »
I've tuned this ECU before.

What are you doing exactly?

Also, I wouldn't flash a transverse file from A3 (I believe) on a Longitudinal Passat.
Most likely the throttle won't work and so on, if it will even boot.

But I guarantee you will have subtle running issues with a lot of stuff.
« Last Edit: February 21, 2013, 05:21:42 PM by prj » Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
Barks
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 34
« Reply #6 on: February 24, 2013, 12:30:05 PM »
Hello,

I would just be using a 018f as a starter for 10 for the XDF

The car has already been mapped for a K04-001, but my friend is finding it a little too aggressive for a FWD (very all or nothing in his words), so the plan was just to make it a little more progressive and wind it back a little.

Well that was the plan, just wondered if there was a XDF kicking around to save a bit of work, Do you have you a partial?? Currently using a 4B0906018CG XDF for a baseline

Cheers

Dave
« Last Edit: February 24, 2013, 12:35:41 PM by Barks » Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 28, 2024, 07:47:17 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.022 seconds with 18 queries. (Pretty URLs adds 0s, 0q)