Erase Bosch ME 7.0 ECU

Pages: [1]

« previous next »

Author

Topic: Erase Bosch ME 7.0 ECU (Read 13610 times)

ivorcam

Newbie

Karma: +2/-0
Offline

Offline

Posts: 2

	Erase Bosch ME 7.0 ECU « on: January 06, 2011, 06:53:29 AM »

Hello
I am new to this forum and i will be very pleased if somebody can help me with this issue.
I have a secondhand ECU and I want to use it in my car. I went to the stealer and they informed me that they cannot owerwrite the data in a secondhand ECU. It has something to do with the immobilizer code.
Is it possible to erase/flash all the informations stored so that the box is "empty" and can be reflashed?
And what tool can be used. I am thinking about Galetto or
KWP 2000.
The ECU is a Bosch ME7 part no.0261206828.
Thank you in advance


« Last Edit: January 06, 2011, 06:59:33 AM by ivorcam »	Logged

carlossus

Sr. Member

Karma: +38/-0
Offline

Offline

Posts: 394

Leon Curpa Stg1+

	Re: Erase Bosch ME 7.0 ECU « Reply #1 on: January 06, 2011, 07:04:41 AM »

A few of us are doing this at the moment, you should check this thread...

http://www.nefariousmotorsports.com/forum/index.php?topic=300.0title=

-C


	Logged

pvl

Sr. Member

Karma: +32/-1
Offline

Offline

Posts: 350

	Re: Erase Bosch ME 7.0 ECU « Reply #2 on: February 01, 2011, 03:21:10 PM »

Hi,

I think that is possible. But we need to get things straight as of for what car this ecu is meanth. Your ecunumber (0261206828) seems a number for a volvo. Is this correct ?

Ifso, what volvo would you like it to be for ? And what's now the software in it ? (for which
volvo was it originally programmed). I have such a ecu laying about, but messed up the flashrom, sadly. Perhaps we can both help eachother out a bit. What kinda tools do you
have already to read-out ? There are tools that do these boxes (flashrom) via K-line.

Hope to hear from you soon,

Cheers,

PvL


	Logged

ivorcam

Newbie

Karma: +2/-0
Offline

Offline

Posts: 2

	Re: Erase Bosch ME 7.0 ECU « Reply #3 on: February 05, 2011, 06:19:09 AM »

Thanks for your reply.
Yes it is a Volvo ECU. My car is a V70 2001 B5244T3. I got a spare ECU from a breaker to have it remapped in Sweden. The spare has been taken from a T5 (B5234T3).
I do not have any flash tools yet as this is what i am also looking for and i will only do it whith the ECU removed from the car.
It seems that all the information around is only for VAG cars.
Cheers
Michael

Quote

I think that is possible. But we need to get things straight as of for what car this ecu is meanth. Your ecunumber (0261206828) seems a number for a volvo. Is this correct ?

Ifso, what volvo would you like it to be for ? And what's now the software in it ? (for which
volvo was it originally programmed). I have such a ecu laying about, but messed up the flashrom, sadly. Perhaps we can both help eachother out a bit. What kinda tools do you
have already to read-out ? There are tools that do these boxes (flashrom) via K-line.

Hope to hear from you soon,

Cheers,

PvL


« Last Edit: February 05, 2011, 02:23:48 PM by Tony@NefMoto »	Logged

adam12112

Newbie

Karma: +1/-0
Offline

Offline

Posts: 3

	Re: Erase Bosch ME 7.0 ECU « Reply #4 on: May 21, 2011, 03:14:38 AM »

Hi,
I have the same question for bosch 0261206828 from volvo, ivorcam are you find solutions how make virgin this unit ?
Can I read/write this ECU using Nefmoto software with vag cable?
Regards


	Logged

DJGonzo

Guest

	Re: Erase Bosch ME 7.0 ECU « Reply #5 on: May 21, 2011, 06:32:35 AM »

Only way to flash Volvo ECU's is to do boot mode.


	Logged

adam12112

Newbie

Karma: +1/-0
Offline

Offline

Posts: 3

	Re: Erase Bosch ME 7.0 ECU « Reply #6 on: May 21, 2011, 02:12:52 PM »

What tool can i use?


	Logged

Dilemma

Newbie

Karma: +5/-0
Offline

Offline

Posts: 11

	Re: Erase Bosch ME 7.0 ECU « Reply #7 on: August 02, 2011, 07:43:41 AM »

Volvo ME7 flashing is possible through canbus.


	Logged

Yorl

Newbie

Karma: +0/-0
Offline

Offline

Posts: 12

	Re: Erase Bosch ME 7.0 ECU « Reply #8 on: April 10, 2012, 11:48:49 AM »

How would you flash through canbus?? Interested in this...


	Logged

diagnosticator

Jr. Member

Karma: +2/-0
Offline

Offline

Posts: 42

	Re: Erase Bosch ME 7.0 ECU « Reply #9 on: November 03, 2012, 07:47:58 AM »

In order to flash via CAN buss, the ECU must be CAN diagnosics capable. Otherwise, the flash is via K line. CAN diagnostics was not implimented prior to MY 2004 AFAIK.


« Last Edit: November 03, 2012, 07:50:02 AM by diagnosticator »	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

December 02, 2024, 02:10:05 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search