NefMoto > Technical > Reverse Engineering > 2step & Antilag Auto Add Script. for ME7.X
Pages: 1 ... 29 30 [31] 32 33 ... 35
« previous next »
Author Topic: 2step & Antilag Auto Add Script. for ME7.X  (Read 384372 times)
eibxmatic
Jr. Member
**

Karma: +1/-0
Offline Offline

Posts: 39
« Reply #450 on: March 08, 2016, 11:19:08 PM »
The problem isn't ignoring the posts but to not be able to run this simple script.

Maybe deleting such posts to have this post sorted again and blocking such posters for a few days could be a solution
Logged
TijnCU
Hero Member
*****

Karma: +60/-4
Offline Offline

Posts: 690


flying brick
« Reply #451 on: March 09, 2016, 01:03:26 AM »
Logged
My project (all photos back online!)
tdehrmann1
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 13
« Reply #452 on: March 09, 2016, 02:58:10 AM »
my problem is not to run this script. And i read the 30 sites before i post my question. also i read the post how to manually inject the NLS and LC in the .bin file. But there are difference between this ecu and my ecu. I tried to figure it out by myself but i had not any success. I want to learn these things by doing.
Logged
tdehrmann1
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 13
« Reply #453 on: March 09, 2016, 12:05:26 PM »
Quote from: mironet8 on March 08, 2016, 12:35:54 PM
Hello, can someone add NLS and ALS into my ECU? I am noob. ECU nr. is 06A906032HN
I have been trying it for 2 days and I still dont know how to add this into my ECU. Please help me.  Cry Cry
Map is modified from ABT Sportsline.


I'm trying it since september 2015 and still no success. have you already used the script?
Logged
tdehrmann1
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 13
« Reply #454 on: March 09, 2016, 03:00:08 PM »
Quote from: gt-innovation on December 29, 2015, 03:22:29 AM
use my tool which i posted a lot of time ago..

It is the initial ver of the code without tmotlin check.

You just have to fill out the info from the .ecu file by hand...

Was too lazy to make a parser...

http://nefariousmotorsports.com/forum/index.php?topic=7794.msg72698#msg72698

how can i find out the variables for ConditionVariables and MainCodeAdresss? these are the only 2 things that i dont understand. open the .ecu file and search for the variables is easy. I think this is the adress for free space right?
Logged
sokol22
Newbie
*

Karma: +0/-6
Offline Offline

Posts: 2
« Reply #455 on: March 26, 2016, 05:20:14 PM »
can somone help me to upload script to my ecu file ?  Roll Eyes
Logged
gt-innovation
Sr. Member
****

Karma: +60/-89
Offline Offline

Posts: 447
« Reply #456 on: March 27, 2016, 07:17:05 AM »
Quote from: tdehrmann1 on March 09, 2016, 03:00:08 PM
how can i find out the variables for ConditionVariables and MainCodeAdresss? these are the only 2 things that i dont understand. open the .ecu file and search for the variables is easy. I think this is the adress for free space right?

Everything you need is in the .ecu file. The others are just free spaces which you select...
Logged
seany260
Full Member
***

Karma: +0/-1
Offline Offline

Posts: 119
« Reply #457 on: April 01, 2016, 05:50:59 AM »
Hi I'm trying to implement the launch and anti lag but there is nothing functioning. I've put my file into the script checksumed and seamed like it worked but not holding RPM at launch or gear change. Im obviously missing something basic.

C:\launch>launch ecu.bin dump.ecu
finding tsrldyn...
found: 380BFD
finding vfil_w...
found: 381E12
finding nmot_w...
found: 00F89E
finding wped...
found: 3809CD
finding tmotlin...
found: 3848B7
finding B_kuppl (clutch pedal)...
found: 00FD4C.6
finding b_br (brems), brake pedal...
found: 00FD4C.2
Memory Layout: 29F800 Found
Found usable status flag variable at 0x00FDc2
FTOMN found: 1b05f
FTOMN IS: 05
FTOMN CHANGED TO 0x00
Finding a good space for Main Function..
space located at: 0xbe3a0
Finding a good space for launch control configuration variables..
space located at: 0x17520
using 0x384FF0 for NLS Counter variable
Finding the offset for call to the code cave..
call will be located at: 0xb7416

Writing lines of code

code writed successfully to ecu_mod.bin!!

file attached 518ak v3
thank you to the creators!

Update!
Ive used v4 of the script, changed the locations of the code and NLS is now working but still not LC. Im suspecting nothing worked using the v5 script because ive read the tmotlin check is not done properly in some files. what could I check now?
thanks
updated file attached  

log update!
I managed to get a log done this morning, I would be greatful if some one could please have a look to see if they can spot anything thats stopping the LC from functioning, thank you. Wink
« Last Edit: April 04, 2016, 11:46:46 PM by seany260 » Logged
antoffka666
Full Member
***

Karma: +11/-2
Offline Offline

Posts: 82
« Reply #458 on: May 18, 2016, 04:08:06 AM »
Hello everybody ! there is a patch to the firmware 512 kb 4B0906018P  ?
« Last Edit: May 27, 2016, 01:44:00 AM by antoffka666 » Logged
mickeyd1984
Jr. Member
**

Karma: +0/-5
Offline Offline

Posts: 34
« Reply #459 on: May 18, 2016, 04:33:08 PM »
Really where?
Logged
antoffka666
Full Member
***

Karma: +11/-2
Offline Offline

Posts: 82
« Reply #460 on: May 20, 2016, 04:14:31 AM »
Quote from: mickeyd1984 on May 18, 2016, 04:33:08 PM
Really where?

This was the question) Google translator )
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12233


WWW
« Reply #461 on: May 20, 2016, 10:43:04 AM »
Quote from: antoffka666 on May 20, 2016, 04:14:31 AM
This was the question) Google translator )

You could edit your post and add a "?", you know.
Logged
ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
TijnCU
Hero Member
*****

Karma: +60/-4
Offline Offline

Posts: 690


flying brick
« Reply #462 on: May 21, 2016, 03:41:38 AM »
No patch, just manually locate free (unaccessed) flash space and set FTOMN to 01. If you had read this thread, you would have found out!
Logged
My project (all photos back online!)
scottjoshuac
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 1
« Reply #463 on: June 12, 2016, 08:28:11 PM »
I've used this script on my 1.8t before. Now I'm trying it on my VRT and get the below error. Can anyone point me in the right direction for this? My ECU is tuned with C2 Stage 1+... Maybe that's why?
C:\php>php launch.php ecu.bin ecu.ecu
finding tsrldyn...
found: 380705
finding vfil_w...
found: 381226
finding nmot_w...
found: 00F81C
finding wped...
found: 3804B6
finding tmotlin...
found: 3848A4
finding B_kuppl (clutch pedal)...
found: 00FD54.12
finding b_br (brems), brake pedal...
found: 00FD54.8
Memory Layout: 29F800 Found
Found usable status flag variable at 0x00FDba
FTOMN found: 1a4ce
FTOMN IS: 0a
FTOMN CHANGED TO 0x00
Finding a good space for Main Function..
space located at: 0xb5980
Finding a good space for launch control configuration variables..
cannot find space for configuration variables, please input offset by argument!
Logged
sokol22
Newbie
*

Karma: +0/-6
Offline Offline

Posts: 2
« Reply #464 on: June 14, 2016, 01:30:18 PM »
can someone patch my bin file ?
Logged
Pages: 1 ... 29 30 [31] 32 33 ... 35
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • April 27, 2024, 01:41:22 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.025 seconds with 17 queries. (Pretty URLs adds 0s, 0q)