Pages: 1 [2]
Author Topic: NefMoto Flasher trouble? What happened?  (Read 12729 times)
ddillenger
Hero Member
*****

Karma: +637/-21
Offline Offline

Posts: 5640


« Reply #15 on: March 04, 2013, 11:46:02 PM »

After completing a flash, if you can connect with VCDS or any other diagnostic software, chances are the flash was successful. Scan for codes, anything that doesn't reference programming not finished, or checksum error isn't a big deal.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
KBUR
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 32


« Reply #16 on: March 05, 2013, 11:54:57 AM »

Hi all,

You were correct - bad *bin seems to have been the root cause.
The check to see whether NefMoto can connect already in the bench saves a lot of time.
Original bin worked fine, now I'm even back to my tune and it's still working.
Fantastic!
I look forward to see if the ECU tolerates the higher boost now...

See ya

/K
Logged
cyril279
Full Member
***

Karma: +12/-2
Offline Offline

Posts: 140


« Reply #17 on: March 05, 2013, 12:38:27 PM »

-glad we could help.

-now that your immediate issues are resolved, please take the time to read through some of the stickies of the forum, they will help immensely to sharpen up the details of the hardware, software, tuning.

happy flashing
-Cyril
Logged
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 16 queries. (Pretty URLs adds 0s, 0q)