NefMoto > Technical > Tuning > Tuning nmax and vmax
Pages: [1]
« previous next »
Author Topic: Tuning nmax and vmax  (Read 5380 times)
icarus
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 9
« on: March 05, 2013, 05:34:03 PM »
ok so this will be my first changes in my software. because its simple and trying out tuner pro. so i open nmax ( it's a scalar obviously) and it is set to 64. is it safe to say then that my rpm limit is 6400? and moving it to 67 would make it 6700. my confusion is also that i heard the rpm limit is supposed to be 6700 stock anyways. my .xdf did not have vmax so i added it an xdf parameter using the location i have in a spreadsheet. and when i open that scalar it is set to zero, is that normal when creating parameters?
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655
« Reply #1 on: March 05, 2013, 05:49:49 PM »
post original.
Logged
icarus
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 9
« Reply #2 on: March 05, 2013, 06:03:52 PM »
well here is my bin xdf and the spreadsheet i have showing where the info is to create xdf maps
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655
« Reply #3 on: March 05, 2013, 06:18:08 PM »
nmax is 16af4. says it right there in the csv.
Logged
icarus
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 9
« Reply #4 on: March 05, 2013, 06:29:20 PM »
yea when i open it up in tuner pro it shows up as 64. so the value for my rpm limiter is 64? so thats 6400 i am assuming
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640
« Reply #5 on: March 05, 2013, 06:31:07 PM »
I highly doubt that's right.

I just checked, when I looked at your bin nmax had a value of 6800, and the location I have is the same as yours. How do you have the scalar configured?

It's a 16bit variable, with a conversion of .2500000*x (enter that into the equation field)

sooooo, you have the right location, but you need to configure the scalar.
« Last Edit: March 05, 2013, 06:40:33 PM by ddillenger » Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655
« Reply #6 on: March 05, 2013, 06:40:21 PM »
Quote from: icarus on March 05, 2013, 06:29:20 PM
yea when i open it up in tuner pro it shows up as 64. so the value for my rpm limiter is 64? so thats 6400 i am assuming

16bit, .25 factor. 6800 is stock.
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 30, 2024, 10:01:32 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 18 queries. (Pretty URLs adds 0s, 0q)