|
elRey
|
 |
« Reply #30 on: January 31, 2013, 10:53:58 AM »
|
|
|
Very cool. So my assumptions were completely wrong (aren't they always  ) Thanks for the help guys. |
|
|
|
|
Logged
|
|
|
|
20VTMK1
Full Member
Karma: +0/-0
 Offline
Posts: 113
|
|
« Reply #31 on: November 23, 2013, 12:52:01 PM »
|
|
|
For information sake ..
On the 1.8T 20V , I found that if one index's the dekas as best as possible the mis fires are almost gone .
Fitting the injectors as per the stockers (all plugs parallel to rail ) doesn't mean the injector holes or pintels are in the OEM orientation. you need to rotate the injectors to get the pintels lined up parallel to the rail.
Any one else found this ?
|
|
|
|
|
Logged
|
|
|
|
|
BlackT
|
|
« Reply #32 on: October 19, 2020, 09:03:24 AM »
|
|
|
Anybody menage to dial this injectors on 1.8T?
What TVUB, TEMIN, and FKKVS to start with?
|
|
|
|
|
Logged
|
|
|
|
Auriaka
Full Member
Karma: +17/-2
Offline
Posts: 113
|
|
« Reply #33 on: October 19, 2020, 09:10:42 AM »
|
|
|
@ 4bar
10v 11v 12v 13v 14v 15v
0.83 0.64 0.50 0.38 0.28 0.17
0.04351 KRK
0.424 temin.
Non scaled, WOT fueling is sport on with lambse control at .995-1.015. FKKVS took care of bottom and middle
|
|
|
|
|
Logged
|
|
|
|
|
BlackT
|
|
« Reply #34 on: October 19, 2020, 09:22:19 AM »
|
|
|
Similar to mine, but I can't dial up them on idle. Can't make stable idle whatever I do
I am using them on 3 Bar
Can you share your FKKVS?
My KRKTE is 0.055
|
|
|
|
|
Logged
|
|
|
|
Auriaka
Full Member
Karma: +17/-2
Offline
Posts: 113
|
|
« Reply #35 on: October 19, 2020, 09:42:00 AM »
|
|
|
Here. This is a wierd intake and throttle body though... Throttle body was moved away from intake plenum due to intricacies of owners setup...
|
|
|
|
|
Logged
|
|
|
|
|
Blazius
|
|
« Reply #36 on: October 19, 2020, 12:37:58 PM »
|
|
|
Why would you ever use these, they are awful and they aint even that cheap.
|
|
|
|
|
Logged
|
|
|
|
|
BlackT
|
|
« Reply #37 on: October 19, 2020, 12:49:41 PM »
|
|
|
Thank you very much, will try again tomorow, did you need to touch anything about lambda control, WBO PID?
|
|
|
|
|
Logged
|
|
|
|
Auriaka
Full Member
Karma: +17/-2
Offline
Posts: 113
|
|
« Reply #38 on: October 19, 2020, 01:32:59 PM »
|
|
|
I touched nothing other then aforementioned.
Only reason Im using these is because its what my client has on hand and his desperately needed more injector... its a stop gap that has turned into a science experiment
|
|
|
|
|
Logged
|
|
|
|
|
BlackT
|
|
« Reply #39 on: October 20, 2020, 01:57:15 AM »
|
|
|
It doesen't work  car still won't idle. Rpm and AFR goes wild |
|
|
|
« Last Edit: October 20, 2020, 03:06:10 AM by BlackT »
|
Logged
|
|
|
|
Auriaka
Full Member
Karma: +17/-2
Offline
Posts: 113
|
|
« Reply #40 on: October 20, 2020, 10:42:02 AM »
|
|
|
Perhaps you have knock offs?
|
|
|
|
|
Logged
|
|
|
|
|
nyet
|
|
« Reply #41 on: October 20, 2020, 11:14:00 AM »
|
|
|
They're also notorious for leaking
|
|
|
|
|
Logged
|
ME7.1 tuning guideECUx PlotME7Sum checksumTrim heatmap toolPlease do not ask me for tunes. I'm here to help people make their own. Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
|
|
|
|
BlackT
|
|
« Reply #42 on: October 20, 2020, 11:45:54 AM »
|
|
|
When I go WOT and stop the car i have perfect idle for 15-20sec, but as time passes and car is at idle the things worsen.
I assume that this is beacuse wall weting or something similar. Even that lambda show close to 14.7 AFR, when I remove spark plugs I can see wet pistons
Today I have manage to bringe idle +- 30 RPM. But still away from ideal. I have much missfire
Most likely I will go back to 440 cc, green bosch
|
|
|
|
|
Logged
|
|
|
|
|
nyet
|
|
« Reply #43 on: October 20, 2020, 11:49:00 AM »
|
|
|
When I go WOT and stop the car i have perfect idle for 15-20sec, but as time passes and car is at idle the things worsen
They're super sensitive to underhood temps in my experience. They fail (lean) or leak (rich) |
|
|
|
|
Logged
|
ME7.1 tuning guideECUx PlotME7Sum checksumTrim heatmap toolPlease do not ask me for tunes. I'm here to help people make their own. Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
|
|
|
|
BlackT
|
|
« Reply #44 on: October 20, 2020, 11:58:32 AM »
|
|
|
Perhaps you have knock offs?
Schould be original, I can't say 100% they are, beacuse I don't have experience with siemens. But they don't look like some bad copy |
|
|
|
|
Logged
|
|
|
|
|
