NefMoto > Technical > Tuning > Any experience with ME7.2.8?
Pages: [1]
« previous next »
Author Topic: Any experience with ME7.2.8?  (Read 5627 times)
BryanTracy85
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 7
« on: March 21, 2013, 03:31:33 PM »
Hello all, I have been reading a lot of good information on this site and trying to find some additional maps in my ME7.2.8. Before I waste anyones time with questions, does anyone have any experience looking at this version ME?

Thanks,
Bryan
Logged
BryanTracy85
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 7
« Reply #1 on: March 26, 2013, 06:27:10 AM »
No one? I am having a few issues I would like to straighten out. First, anytime I cruise between 1800 and 2200 rpms, the car gets kicked out of closed loop and AFR's are around 12.1:1, making for some terrible fuel economy. Next, but not so critical to the driveability of the vehicle, is I removed the SAI pump and valves, as well as the charcoal canister due to space constraints with the project build. I would like to find the addresses in winOLS to eliminate those checks so I do not have the CEL on in the cluster as I do not have emissions testing in my area.

Thanks,
Bryan Tracy
Logged
vdubnation
Turboman
Global Moderator
Sr. Member
*****

Karma: +49/-2
Offline Offline

Posts: 433
« Reply #2 on: March 26, 2013, 07:07:10 AM »
Give us some more info what car are we talking about which motor and do you have a ecu number ?
Logged
BryanTracy85
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 7
« Reply #3 on: March 26, 2013, 08:28:55 AM »
I can grab the ECU info when I get home from work, and can upload a winOLS file if you would like. This is a Chrysler Crossfire SRT-6 (recycled R170 SLK32 AMG chassis) with the Mercedes M112K 3.2L Kompressor motor. A few years back I decided to remove the factory eaton supercharger and built a turbokit.
Logged
BryanTracy85
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 7
« Reply #4 on: March 26, 2013, 02:53:15 PM »
Quote from: vdubnation on March 26, 2013, 07:07:10 AM
Give us some more info what car are we talking about which motor and do you have a ecu number ?

0261201281 / 1037377860
Logged
BryanTracy85
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 7
« Reply #5 on: March 29, 2013, 01:07:21 PM »
Well, if anyone can lend a hand on how to correct this rich issue at cruise, that would be very helpful. 12:1 and richer at cruise is going to make me broke putting fuel into this thing.
Logged
BryanTracy85
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 7
« Reply #6 on: April 05, 2013, 03:30:37 AM »
Still looking for help. I have been looking through the hex in winOLS and it is tough trying to find undefined maps. I am still in need of assistance finding either the part throttle open loop maps or the closed to open loop switch over parameters. As well as the emissions checks for the SAI pump and charcoal canister as I get a code for both.

Thanks,
Bryan Tracy
Logged
BryanTracy85
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 7
« Reply #7 on: April 09, 2013, 03:40:08 AM »
Here is my stock file.
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 27, 2024, 01:31:24 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)