CoupedUp
Full Member
Karma: +0/-0
 Offline
Posts: 59
|
 |
« on: March 26, 2013, 07:31:45 PM »
|
|
|
I'm trying to find out where ESKONF is in my BIN but I don't know how to find it. I am looking at a stock 4Z7907551R ME7.1.1 BEL 2.7T bin. I've read through the Emissions delete and setting readiness thread but it all appears to apply to other ECUs. I've checked the addresses mentioned in that thread but I don't see anything similar to it.
I guess, also moving forward after finding where ESKONF is, I'll need to figure out which bits are what(which order are they in)? How can I do this?
TIA,
Sean
|
|
|
|
|
Logged
|
|
|
|
|
catbed
|
|
« Reply #1 on: March 26, 2013, 07:49:09 PM »
|
|
|
I'm trying to find out where ESKONF is in my BIN but I don't know how to find it. I am looking at a stock 4Z7907551R ME7.1.1 BEL 2.7T bin. I've read through the Emissions delete and setting readiness thread but it all appears to apply to other ECUs. I've checked the addresses mentioned in that thread but I don't see anything similar to it.
I guess, also moving forward after finding where ESKONF is, I'll need to figure out which bits are what(which order are they in)? How can I do this?
TIA,
Sean
Disassembly is really the only way to find the correct bits. Upload your file and I'm sure some people will take a look for you. |
|
|
|
|
Logged
|
|
|
|
CoupedUp
Full Member
Karma: +0/-0
Offline
Posts: 59
|
|
« Reply #2 on: March 26, 2013, 08:06:10 PM »
|
|
|
Attached is the file. Code disassembly seems awfully intimidating to a mechanical engineer but I'm definitely willing to look into it.
|
|
|
|
|
Logged
|
|
|
|
|
catbed
|
|
« Reply #3 on: March 26, 2013, 09:52:04 PM »
|
|
|
Attached is the file. Code disassembly seems awfully intimidating to a mechanical engineer but I'm definitely willing to look into it.
Ah, a fellow mechie. I have yet to delve into IDA. Figure I'll get my car tuned 100% to my liking before trying anything. I believe ESKONF is located @10C86. Maybe someone else will chime in here to be sure. |
|
|
|
« Last Edit: March 26, 2013, 09:55:05 PM by catbed »
|
Logged
|
|
|
|
CoupedUp
Full Member
Karma: +0/-0
Offline
Posts: 59
|
|
« Reply #4 on: March 27, 2013, 10:24:06 AM »
|
|
|
Thanks, if that's the case.
It looks like:
From To
0x10C86: 00 C0
0x10C87: F0 FF (Examples I've seen are F3 -> FF)
For SLS & SLV(if in same location, relatively):
0x10C85: (bits 4 and 5 to 1 instead of 0)
0x10C87: (bits 4 and 5 to 1 instead of 0, if FF didn't do that)
For the last two, I'll need to brush up on my hex to dec as it's been a minute since I've looked at their four bit representations. This is what I could see while on my lunch break.
|
|
|
|
|
Logged
|
|
|
|
NOTORIOUS VR
Administrator
Hero Member
Karma: +58/-7
Offline
Posts: 1056
|
|
« Reply #5 on: June 25, 2013, 10:56:40 AM »
|
|
|
need a little help...
I've narrowed down where the ESKONF is in the 551R box (I think so anyway), but am having a hard time making sure it's the right one.
The string which could be the ESKONF seem to repeat itself with one slight change.
Can anyone help/confirm where the proper Byte 0 is?
Thanks!
|
|
|
|
|
Logged
|
|
|
|
NetMofo
Newbie
Karma: +0/-0
Offline
Posts: 10
|
|
« Reply #6 on: June 27, 2013, 10:06:38 AM »
|
|
|
|
|
|
|
|
Logged
|
|
|
|
NOTORIOUS VR
Administrator
Hero Member
Karma: +58/-7
Offline
Posts: 1056
|
|
« Reply #7 on: June 27, 2013, 10:26:44 AM »
|
|
|
Cool! I didn't think to search for that at all..  Thanks |
|
|
|
|
Logged
|
|
|
|
marrakech
Jr. Member
Karma: +0/-0
Offline
Posts: 30
|
|
« Reply #8 on: January 31, 2015, 12:18:28 PM »
|
|
|
Any info about every bytes meaning?
I want to delete EGT sensors malfunction error...
|
|
|
|
|
Logged
|
|
|
|
learning1
Newbie
Karma: +3/-0
Offline
Posts: 9
|
|
« Reply #9 on: September 28, 2015, 05:19:55 PM »
|
|
|
It looks like:
From To
0x10C86: 00 C0
0x10C87: F0 FF (Examples I've seen are F3 -> FF)
0x10C87: F0 to ?? Can you post your results thanks F0 = 1111 0000 F3 = 1111 0011 FC = 1111 1100 FF = 1111 1111 F6 = 1111 0110 Fomr the S4 wiki ESKONF[5] (0x10C7A) - set to 0xC0 (set bits 6 and 7) ESKONF[6] (0x10C7B) - set from 0xF3 to 0xFF (M-box) (set bits 2 and 3) you might wish to CHECK CLRHK is also 0x48 -> 0x49 or set to 0x05 BIT 1 and 4 must be set |
|
|
|
|
Logged
|
|
|
|
|
Snow Trooper
|
|
« Reply #10 on: September 28, 2015, 10:28:51 PM »
|
|
|
Hope this helps. the file has what I use to set readiness, it has never not worked for me.
I also exported a csv with map info for every map I change on an a6/allroad for my stage2/catless/readiness needs.
|
|
|
|
|
Logged
|
cartoons?
6A 61 72 65 64 40 76 6C 6D 73 70 65 63
|
|
|
tom-k
Jr. Member
Karma: +0/-0
Offline
Posts: 33
|
|
« Reply #11 on: January 15, 2021, 08:03:10 AM »
|
|
|
Anyone has know full bits pair of ESKONF for 551R or 551N bin?
|
|
|
|
|
Logged
|
|
|
|
bikemaker
Newbie
Karma: +0/-0
Offline
Posts: 7
|
|
« Reply #12 on: January 21, 2021, 08:40:43 PM »
|
|
|
Anyone has know full bits pair of ESKONF for 551R or 551N bin?
I had the same questions. This is what I came up with |
|
|
|
|
Logged
|
|
|
|
Schumo
Newbie
Karma: +2/-0
Offline
Posts: 18
|
|
« Reply #13 on: April 11, 2024, 12:43:57 PM »
|
|
|
Sorry for bumping this old thread with my noob question, but for what stands "II", "ZAS" and "LUES"? I can't find them in the wiki.
|
|
|
|
|
Logged
|
|
|
|
|
