Lumpy Idle after IOP,IRL changes -> KFMI

Pages: 1 [2]

« previous next »

Author

Topic: Lumpy Idle after IOP,IRL changes -> KFMI_UM? (Read 17988 times)

ddillenger

Hero Member

Karma: +641/-21
Offline

Offline

Posts: 5640

	Re: Lumpy Idle after IOP,IRL changes -> KFMI_UM? « Reply #15 on: April 29, 2013, 05:48:04 PM »

I've had some good results bumping the pressure up with the 630s, seems to smooth things out a bit. If you've seen used dekas on a flowbench, you'll understand they dribble more than they spray. More pressure seems to be a bandaid.


	Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM

nyet

Administrator
Hero Member

Karma: +607/-168
Online

Online

Posts: 12270

	Re: Lumpy Idle after IOP,IRL changes -> KFMI_UM? « Reply #16 on: April 29, 2013, 05:49:21 PM »

Quote from: ddillenger on April 29, 2013, 05:48:04 PM

I think the problem is exacerbated by heat as well, which is why they idle WORSE after the motor is warmed up...


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

catbed

Sr. Member

Karma: +8/-2
Offline

Offline

Posts: 300

	Re: Lumpy Idle after IOP,IRL changes -> KFMI_UM? « Reply #17 on: April 29, 2013, 05:52:52 PM »

Quote from: nyet on April 29, 2013, 05:38:46 PM

i assume your idle trims are stable throughout the warmup cycle, all the way through normal engine temps?

If not, maybe take a peek at KFFWL and try to get them stable? perhaps wall wetting tables as well?

the dekas just suck IMO. some batches just won't seem to idle right, no matter what you do.

Or, maybe we're all just missing something.

Yup, idle trims are within 3%. My next train of thought was indeed wall wetting, as I know these injectors are crap.

dd, I do have a 4bar FPR I can throw in. That was on my list to do before getting new injectors. I think ID1000s or EV14 biguns are my choice.

EDIT: I still think it could be a software issue. It idled fine on my OTS Uni tune that I ran up until a couple weeks ago.


« Last Edit: April 29, 2013, 06:07:47 PM by catbed »	Logged

phila_dot

Hero Member

Karma: +173/-11
Offline

Offline

Posts: 1709

	Re: Lumpy Idle after IOP,IRL changes -> KFMI_UM? « Reply #18 on: April 29, 2013, 06:08:04 PM »

What does wall wetting have to do with idle?


	Logged

nyet

Administrator
Hero Member

Karma: +607/-168
Online

Online

Posts: 12270

	Re: Lumpy Idle after IOP,IRL changes -> KFMI_UM? « Reply #19 on: April 29, 2013, 06:54:30 PM »

I thought wall wetting sometimes throws closed loop fueling off as the ecu adds/removes fuel, delaying the adjustment's effect and inducing wide swings in trims.

but that is just regurgitating somebody else told me a long time ago. Perhaps it was bs?


	Logged

catbed

Sr. Member

Karma: +8/-2
Offline

Offline

Posts: 300

	Re: Lumpy Idle after IOP,IRL changes -> KFMI_UM? « Reply #20 on: April 29, 2013, 07:24:47 PM »

Wall wetting was just an idea. Haven't delved into the FR about it yet though.


	Logged

phila_dot

Hero Member

Karma: +173/-11
Offline

Offline

Posts: 1709

	Re: Lumpy Idle after IOP,IRL changes -> KFMI_UM? « Reply #21 on: April 29, 2013, 08:34:30 PM »

The idea is to maintain target lambda during load changes.

If wall wetting is causing problems at idle, then the injector calibration is off elsewhere and tmot based changes in wall wetting is exposing it.


	Logged

catbed

Sr. Member

Karma: +8/-2
Offline

Offline

Posts: 300

	Re: Lumpy Idle after IOP,IRL changes -> KFMI_UM? « Reply #22 on: April 30, 2013, 01:02:07 PM »

Any other ideas besides bumping up fuel pressure? Like I said it idled fine with my OTS Uni tune that I was running until a few weeks ago.


	Logged

Pages: 1 [2]

« previous next »

Jump to:

Navigation

Personal Tools

November 26, 2024, 03:12:10 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search