NefMoto > Technical > Flashing and Chipping > ecu part number swap info
Pages: [1]
« previous next »
Author Topic: ecu part number swap info  (Read 4949 times)
coreyj03
Full Member
***

Karma: +10/-5
Offline Offline

Posts: 173
« on: April 16, 2013, 07:45:47 AM »
just sharing what i have found, i can flash 1.8t file to vw 06a 906 032 2.slow ecms and they will run 1.8t and function as 1.8t. and vise versa .  have not tried 2.7 ecms due to having narrow band or any v6 ecms to 1.8t, but i know the passats with 4d0 ecms will run off a 06a ecm with 1.8t software.

i think as long as it has drive by wire and wide band o2 they can interchange with immobilizer defeat.


this may make cheaper options to acquire ecus because 2.0 ecms are really cheap and abundant.
« Last Edit: April 16, 2013, 07:47:27 AM by coreyj03 » Logged
player
Full Member
***

Karma: +1/-5
Offline Offline

Posts: 130
« Reply #1 on: April 23, 2013, 03:46:24 AM »
corey...this is my dillema...i have a 8n0 906 018 S narrowb, dbw, 512kb..i cant flash the dump from 8n0 906 018 A.......(i can but vag-com doesnt recognise it..)...can i just buy any 4b0 906 018???
Logged
coltaaan
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5
« Reply #2 on: April 29, 2013, 10:47:38 AM »
I cant find a 06A 906 031 HS. my question is can I use a 06A 906 031 Hf (auto trans) if so what would I have to do other than Immo? or what other ECU's can I use?
Logged
coreyj03
Full Member
***

Karma: +10/-5
Offline Offline

Posts: 173
« Reply #3 on: April 29, 2013, 02:55:07 PM »
Quote from: coltaaan on April 29, 2013, 10:47:38 AM
I cant find a 06A 906 031 HS. my question is can I use a 06A 906 031 Hf (auto trans) if so what would I have to do other than Immo? or what other ECU's can I use?

yes you can use automatic ecus just flash them with a manual file and immobilizer defeat and your good to go.
Logged
coreyj03
Full Member
***

Karma: +10/-5
Offline Offline

Posts: 173
« Reply #4 on: April 29, 2013, 03:03:56 PM »
Quote from: player on April 23, 2013, 03:46:24 AM
corey...this is my dillema...i have a 8n0 906 018 S narrowb, dbw, 512kb..i cant flash the dump from 8n0 906 018 A.......(i can but vag-com doesnt recognise it..)...can i just buy any 4b0 906 018???

i would say if the hardware looks them same in the 4b0 906 018 ecu as in the 8n0 906 018 and they are both 4 cyl, narrowband, and dbw then id go for it.   i have a 4b0 ecu but i dont have a 8n0 to compare. 
Logged
coreyj03
Full Member
***

Karma: +10/-5
Offline Offline

Posts: 173
« Reply #5 on: April 30, 2013, 06:20:18 AM »
Quote from: coreyj03 on April 16, 2013, 07:45:47 AM
just sharing what i have found, i can flash 1.8t file to vw 06a 906 032 2.slow ecms and they will run 1.8t and function as 1.8t. and vise versa .  have not tried 2.7 ecms due to having narrow band or any v6 ecms , but i know the passats with 4d0 ecms will run off a 06a ecm with 1.8t software.

i think as long as it has drive by wire and wide band o2 they can interchange with immobilizer defeat.


this may make cheaper options to acquire ecus because 2.0 ecms are really cheap and abundant.
Logged
player
Full Member
***

Karma: +1/-5
Offline Offline

Posts: 130
« Reply #6 on: April 30, 2013, 02:13:51 PM »
corey...can you try to flash this file into the 4b0 906 018 ecu?and see if vag-com connects to ecu?thanx!
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 30, 2024, 01:20:54 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.034 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)