Pages: [1]
Author Topic: Change of axis, Motronic 2.3  (Read 4405 times)
karel5000
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 52


« on: April 17, 2013, 10:06:02 AM »

Hello,

i would like to ask you, which maps - axis is to be changed, if the engine produces more power than the range of the engine-software (IGA, Lambda maps) enables.

I would like to change the x-axis of the folowing maps: all main IGA maps and all the lambda correction maps. Should i change also some other ones?

As the x-axis is the main injection time (as i know) can i easily increase its range (the last value, more injection) without some other addjustments? Will it work without problem?

Thanx!
Karel5000
Logged
Acki
Full Member
***

Karma: +1/-1
Offline Offline

Posts: 75


« Reply #1 on: April 18, 2013, 07:51:47 AM »

I guess prj won't post a very nice post when he reads this Cheesy
Logged
karel5000
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 52


« Reply #2 on: April 18, 2013, 08:49:46 AM »

I guess prj won't post a very nice post when he reads this Cheesy

Yes. But he learns Wink
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.03 seconds with 16 queries. (Pretty URLs adds 0s, 0q)