Pages: [1]
Author Topic: Pin code question  (Read 4053 times)
noelmm
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 1


« on: April 17, 2013, 11:48:46 AM »

Hi everyone,

I'm new here and was hoping you could answer a question for me, a mate of mine would like a spare key doing for his 2009 Audi A6 and has asked me if I can do this as I have a licensed version of vcds.

I don't have a problem doing this except I do not know how to obtain the pin code to login to the immobiliser, in the past for my own Golf Mk4 I have used Vag Taho 2.5 and 3.01 but these will not connect to such a new car as they are not supported so my question is what can I use, I don't want to spend too much as this is a one off but rather than going to the dealer I would like to be able to do it myself if I could.

I was looking at Vas504a and was wondering if this would do what I wanted as I can find no mention of this function.

Thanks for any help you can offer

Noel
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 17 queries. (Pretty URLs adds 0s, 0q)