NefMoto > Technical > Flashing and Chipping > Need som help getting started.
Pages: [1]
« previous next »
Author Topic: Need som help getting started.  (Read 6670 times)
Jim_Coupe
Hero Member
*****

Karma: +16/-12
Offline Offline

Posts: 663
« on: April 18, 2013, 08:29:28 AM »
Hi !

I have been flasing my car with a KWP2000 plus. I used a program called VAGMe7 Flasher/programmer.
But that old computer crashed. Sad

Now i have a new computer with Win7. I have 2 cables. a VAG-COM/ross tech cable that is blue and a KWP2000 plus cable.
When i try to install the 2XX driver for the KWP2000 it refuses. "cannot find any drivers".

When i read the Nefmoto guide i understand it so that i can also use the "Blue ross-tech" cable. But i just dont get that to work woth nefmoto either..  So what is this?  these cables worked fine with WinXP and Vagme7 programmer???

Please help! Smiley
Logged
E85oholic
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12271


WWW
« Reply #1 on: April 18, 2013, 08:35:19 AM »
your cable most likely isn't ftdi based.

Get one that is.
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Jim_Coupe
Hero Member
*****

Karma: +16/-12
Offline Offline

Posts: 663
« Reply #2 on: April 18, 2013, 08:38:17 AM »
Quote from: nyet on April 18, 2013, 08:35:19 AM
your cable most likely isn't ftdi based.

Get one that is.

Hmm oh really? how come i managed to read/write with my old computer ?
Logged
E85oholic
cyril279
Full Member
***

Karma: +12/-2
Offline Offline

Posts: 140
« Reply #3 on: April 18, 2013, 09:08:39 AM »
whether or not your cable worked with a different operating system, or the fact that it is blue, has nothing to do with whether the cable is FTDI based. I understand that there has been a lot of mention on this site about "blue cables", but as the market has become flooded with cheap blue cables utilizing many different methods of operation, the color of the cable has become much less relevant.

There are many cables that work with vag-com or other softwares that are NOT FTDI based cables (ch034 for example)

the fact that you are having trouble getting FTDI drivers installed to the cable is the primary indicator of a NON-FTDI-based cable.

open the cable up, visually read the chip, and we can proceed from there.
Logged
Jim_Coupe
Hero Member
*****

Karma: +16/-12
Offline Offline

Posts: 663
« Reply #4 on: April 18, 2013, 10:06:18 AM »
Quote from: cyril279 on April 18, 2013, 09:08:39 AM
whether or not your cable worked with a different operating system, or the fact that it is blue, has nothing to do with whether the cable is FTDI based. I understand that there has been a lot of mention on this site about "blue cables", but as the market has become flooded with cheap blue cables utilizing many different methods of operation, the color of the cable has become much less relevant.

There are many cables that work with vag-com or other softwares that are NOT FTDI based cables (ch034 for example)

the fact that you are having trouble getting FTDI drivers installed to the cable is the primary indicator of a NON-FTDI-based cable.

open the cable up, visually read the chip, and we can proceed from there.


Thanx for a good answer. Now i understand all this a little better !   Any cables on eBay to recomend.. I´ll looked into the wiki and saw 2 links to eBay.. But there were many cables there
Logged
E85oholic
cyril279
Full Member
***

Karma: +12/-2
Offline Offline

Posts: 140
« Reply #5 on: April 18, 2013, 10:27:13 AM »
This ft232rl-obd cable is sold by Alpha-bid (one of the recommended vendors).  I have not purchased one, so I cannot vouch for it, but I'd trust that it'll get you what you need. If the cable is NOT as expected, please report back to keep us informed.

-Cyril
Logged
Jim_Coupe
Hero Member
*****

Karma: +16/-12
Offline Offline

Posts: 663
« Reply #6 on: April 19, 2013, 01:12:57 AM »
Thank you i will try this one. I´ll report back with some results !

//
Logged
E85oholic
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640
« Reply #7 on: April 19, 2013, 01:18:24 AM »
All galletto cables (at least the ones I"ve purchased and recommended) are compatible with nefmoto and contain the ft232r chipset. Why chance it? Just get the galletto cable.
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
BraxS4
Full Member
***

Karma: +2/-6
Offline Offline

Posts: 162
« Reply #8 on: June 17, 2013, 11:54:59 AM »
yes that cable from alpha works, i just bought one
Logged
stage 3 b5 S4
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 29, 2024, 05:24:17 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 16 queries. (Pretty URLs adds 0s, 0q)