NefMoto > Technical > Tuning > Siemens DEKA 630cc voltage offset
Pages: [1]
« previous next »
Author Topic: Siemens DEKA 630cc voltage offset  (Read 7670 times)
tbm
Full Member
***

Karma: +2/-1
Offline Offline

Posts: 176
« on: April 19, 2013, 08:04:13 AM »
Hi Guys,

I know that these injectors are crap but I have these ones.

I'm confused with Siemens DEKA 630cc voltage offset. I parsed many forums and sites but I didn't find precise answer for my question - what voltage offset I should use for these injectors. According to URL http://injector-rehab.com/shop/lag.html and according to datasheet from siemesdeka site http://siemensdeka.com/specsheets/FI114961cs.jpg there are difference voltage offset.

Could someone share with me what voltage offset use for these injectors?

Thanks in advance!
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640
« Reply #1 on: April 19, 2013, 08:56:21 AM »
Download the nefmoto stage 3 base file, and use that as a starting point. Then, adjust TVUB until idle trims are close to zero (should be good with the nefmoto values).
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
tbm
Full Member
***

Karma: +2/-1
Offline Offline

Posts: 176
« Reply #2 on: April 19, 2013, 11:59:46 AM »
Quote from: ddillenger on April 19, 2013, 08:56:21 AM
Download the nefmoto stage 3 base file, and use that as a starting point. Then, adjust TVUB until idle trims are close to zero (should be good with the nefmoto values).
Hi ddillenger!
Did you mean bin-file from this topic http://nefariousmotorsports.com/forum/index.php?topic=426.0title= ?
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640
« Reply #3 on: April 19, 2013, 12:41:05 PM »
Yes.
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
catbed
Sr. Member
****

Karma: +8/-2
Offline Offline

Posts: 300
« Reply #4 on: April 19, 2013, 01:27:52 PM »
I used these values. http://nefariousmotorsports.com/forum/index.php?topic=1834.msg17780#msg17780

They seem to work pretty well. Idle LTFTs are ~-2%
Logged
professor
Sr. Member
****

Karma: +25/-0
Offline Offline

Posts: 409
« Reply #5 on: April 19, 2013, 02:25:45 PM »
Unfortunately deka to deka may have big differences and you have to fine tune many times to calibrate at the optimal point.
Important is to never mix injectors from different batches where problems could be even bigger and so the time and effort needed for proper tuning/calibration.
Logged
Seat Ibiza MK4 Cupra 1.8t 20V, stg3.
"Those 1.8T 20V machines are really tough" ©
tbm
Full Member
***

Karma: +2/-1
Offline Offline

Posts: 176
« Reply #6 on: April 20, 2013, 12:23:25 PM »
Quote from: ddillenger on April 19, 2013, 08:56:21 AM
Download the nefmoto stage 3 base file, and use that as a starting point. Then, adjust TVUB until idle trims are close to zero (should be good with the nefmoto values).
deleted...
« Last Edit: April 20, 2013, 12:51:05 PM by GOLANt » Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 24, 2024, 10:56:43 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 17 queries. (Pretty URLs adds 0s, 0q)