Pages: 1 [2]
Author Topic: immo disableing 07k906032ac  (Read 15530 times)
thegtiman
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 27


« Reply #15 on: March 29, 2016, 04:10:23 AM »

I have the similar problems on a 2007 EU 8P Audi 3.2 ME7.1.1 (BUB)

Using argdub's tool set to 95160 for eeprom memory and the 1k resistor in the picture, I get to the IDCHIP and then the program falls over.

I can read the ECU's 800BB not problem with my legit MPPS no problem, even in bootmode.
I had no problem to read/write to the older R32 ME7.1.1 ECU (BFH), once the '000' resistor was removed.

Short of removing the eeprom I am still stuck on this one.
Logged
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.011 seconds with 16 queries. (Pretty URLs adds 0s, 0q)