i also noticed that ,
sometimes when set lc rpm limiter(soft without spark cut) works good, but sometimes , 1- 2 gears works perfect but on 3 gear hit cut off about 6300rpm - strange think, probably i messed sth , because , when i set it from stock file works good

MDBGRG
- KFMDBGRG outputs mibgr_w
- mibgr_w goes into a min function with a bunch of other potential limiters
- The output of the min function and entire MDBGRG function is mibgrl_w a limiter for intervention in MDKOL

MDKOL
- mibgrl_w goes into a min function which outputs milsolv_w
- milsolv_w goes into another min with miszull_w or MDIMX depending on application and conditions outputting milsol_w
- MDKOL function output is milsol_w for MDFUE

MDFUE
- milsol_w is corrected for lambda 1 and optimum igniton angle and input to KFMIRL for desired load