Pages: [1]
Author Topic: Reading chipped ecu and transfering to new ecu?  (Read 10680 times)
rik.vwt
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 19


« on: February 15, 2011, 10:02:29 AM »

So I have a defictive ECU 06a 906 032cl that was chipped,(soldered).Recently I had some trouble with it, it would work for 30 minutes thent it would start acting funny.Is it possible to read the chipped maps with nefmoto and then copy them to the new stocky ECU?
Logged
Tony@NefMoto
Administrator
Hero Member
*****

Karma: +130/-4
Offline Offline

Posts: 1389


2001.5 Audi S4 Stage 3


« Reply #1 on: February 15, 2011, 10:54:25 AM »

yes
Logged

Remember you have to log in if you want to see the file attachments!
Info or questions, please add to the wiki: http://www.nefariousmotorsports.com/wiki
Follow NefMoto developments on Twitter: http://twitter.com/nefmoto
carlossus
Sr. Member
****

Karma: +38/-0
Offline Offline

Posts: 394

Leon Curpa Stg1+


« Reply #2 on: February 15, 2011, 11:58:18 AM »

The firmware may block reading, depending who's tune it is.
Logged
Tony@NefMoto
Administrator
Hero Member
*****

Karma: +130/-4
Offline Offline

Posts: 1389


2001.5 Audi S4 Stage 3


« Reply #3 on: February 15, 2011, 12:32:00 PM »

If the file on the ECU blocks reading over OBD, then you can use boot mode with KWP2000Plus, Galletto, or MiniMon to read the ECU.
Logged

Remember you have to log in if you want to see the file attachments!
Info or questions, please add to the wiki: http://www.nefariousmotorsports.com/wiki
Follow NefMoto developments on Twitter: http://twitter.com/nefmoto
Drehkraft
Jr. Member
**

Karma: +9/-0
Offline Offline

Posts: 46


« Reply #4 on: February 21, 2011, 06:39:10 PM »

If the file on the ECU blocks reading over OBD, then you can use boot mode with KWP2000Plus, Galletto, or MiniMon to read the ECU.

If you can't get anywhere reading the file - I can desolder the eeprom and read it for you.

Logged
rik.vwt
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 19


« Reply #5 on: February 22, 2011, 02:50:31 PM »

If the file on the ECU blocks reading over OBD, then you can use boot mode with KWP2000Plus, Galletto, or MiniMon to read the ECU.

If you can't get anywhere reading the file - I can desolder the eeprom and read it for you.


Thanks, the chip that I have is removable, it has the chip holder soldered to the ECU.
Logged
Drehkraft
Jr. Member
**

Karma: +9/-0
Offline Offline

Posts: 46


« Reply #6 on: February 22, 2011, 05:39:26 PM »

Even better - send me the chip and I can read it for you, reflash it to whatever file you provide and send it back!



Logged
Drehkraft
Jr. Member
**

Karma: +9/-0
Offline Offline

Posts: 46


« Reply #7 on: February 22, 2011, 05:45:34 PM »

One more q - is the chip directly socketed or is it on a board with encryption chip?
Logged
rik.vwt
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 19


« Reply #8 on: February 25, 2011, 01:10:49 PM »

One more q - is the chip directly socketed or is it on a board with encryption chip?
Cant remember, but its a GIAC tune made by AWE for a GTi back in 2001 (its old)
Logged
tobz
Full Member
***

Karma: +3/-1
Offline Offline

Posts: 60


« Reply #9 on: March 01, 2011, 12:11:03 PM »

Silly question maybe, but can you use Galletto while the ECU is in the car and still plugged in?  Everything I've read about boot mode implies you need to open up the ECU, but all the Galletto cables use the OBD-II connector... so is everyone building an ECU harness to use the OBD-II connector with the ECU out of the car or is there another way to enter boot mode?
Logged
Tony@NefMoto
Administrator
Hero Member
*****

Karma: +130/-4
Offline Offline

Posts: 1389


2001.5 Audi S4 Stage 3


« Reply #10 on: March 01, 2011, 12:56:34 PM »

You can open up the ECU to do boot mode, but still leave the ECU connected to the car.

It gets a little tricky, but you can do it.
Logged

Remember you have to log in if you want to see the file attachments!
Info or questions, please add to the wiki: http://www.nefariousmotorsports.com/wiki
Follow NefMoto developments on Twitter: http://twitter.com/nefmoto
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.019 seconds with 17 queries. (Pretty URLs adds 0s, 0q)