NefMoto > Technical > Cluster and Immobilizer (Moderator: ddillenger) > Help needed with a AUDI A4 B6 RB4 dump
Pages: [1] 2
« previous next »
Author Topic: Help needed with a AUDI A4 B6 RB4 dump  (Read 13807 times)
Karl Martin
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 10
« on: May 15, 2013, 03:28:36 PM »
Hello

First of all i'm so happy to find tis great forum. In 10 minutes i've learned more than two entire months in searchs on Google!

Then i beg you apologize but my english is weak  Embarrassed

 I have one big problema with my car. It is one Audi A4 B6, TDI, from 2004 with the cluster 8E0 920 900 M RB4.

 My cluster shows SAFE and the needles are crazy and also the AC don't work well.

 I think that something is wrong with the dump file, but the car start and i can run with it.

 Can someone, please, verify this dump and if possible fix it?

 I would stay very gratefull.

 Thanks in advance
 Carlos from Portugal
« Last Edit: May 15, 2013, 03:31:16 PM by Karl Martin » Logged
f1torrents
Sr. Member
****

Karma: +17/-1
Offline Offline

Posts: 303
« Reply #1 on: May 22, 2013, 06:01:40 PM »
Before we go any further.
Is the cluster FUSE ok?
Logged
Karl Martin
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 10
« Reply #2 on: May 26, 2013, 10:35:01 AM »
Quote from: f1torrents on May 22, 2013, 06:01:40 PM
Before we go any further.
Is the cluster FUSE ok?


Sorry, but what means FUSE?  Embarrassed
Logged
f1torrents
Sr. Member
****

Karma: +17/-1
Offline Offline

Posts: 303
« Reply #3 on: May 26, 2013, 10:45:30 AM »
There is a fuse for the cluster in the fuse panel.
Check the cluster fuse and see if its ok.
Logged
f1torrents
Sr. Member
****

Karma: +17/-1
Offline Offline

Posts: 303
« Reply #4 on: May 26, 2013, 10:46:10 AM »
BTW the dump you posted in garbage.

What tool are you using to read this cluster.
Logged
Karl Martin
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 10
« Reply #5 on: May 26, 2013, 10:48:48 AM »
I've checked he fuses and all seem's ok.
I've used Vag K + Can 1.4
Logged
f1torrents
Sr. Member
****

Karma: +17/-1
Offline Offline

Posts: 303
« Reply #6 on: May 26, 2013, 10:52:53 AM »
Did you try to write anything to the cluster with that tool?
Like change the mileage or do anything other than read it?
Logged
Karl Martin
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 10
« Reply #7 on: May 26, 2013, 11:08:38 AM »
After many attempts i think that the cluster is dead. The mechanical change the motor of the car and then he have fried the cluster. Maybe when he attempt to change mileage.
I have bought another cluster and someone have cloned the cluster and all works now.
But even now i don't know what is wrong with the cluster.  Undecided
Logged
Karl Martin
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 10
« Reply #8 on: May 26, 2013, 11:13:38 AM »
Now i have another problem and wonder if you can help me?

I need to extract SKC from dash eeproms: Seat Ibiza and Seat Leon and with my tools i can't do the job.

Can you, please, help me?
Logged
f1torrents
Sr. Member
****

Karma: +17/-1
Offline Offline

Posts: 303
« Reply #9 on: May 26, 2013, 11:15:26 AM »
RB4 clusters are encrypted.
You cannot use clone tools to write to them.

There is only ha handful of tools that will work.

DON'T write to RB4/RB8 clusters with clone tools.
Logged
f1torrents
Sr. Member
****

Karma: +17/-1
Offline Offline

Posts: 303
« Reply #10 on: May 26, 2013, 11:18:52 AM »
Isnt the PIN in the file name you posted.
PIN = SKC

I have not confirmed them. Just noticed that it says PIN= right in the file
Logged
Karl Martin
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 10
« Reply #11 on: May 26, 2013, 11:22:53 AM »
Quote from: f1torrents on May 26, 2013, 11:15:26 AM
RB4 clusters are encrypted.
You cannot use clone tools to write to them.

There is only ha handful of tools that will work.

DON'T write to RB4/RB8 clusters with clone tools.


Yes i've learned by the hard way  Sad
Logged
Karl Martin
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 10
« Reply #12 on: May 26, 2013, 11:24:52 AM »
Quote from: f1torrents on May 26, 2013, 11:18:52 AM
Isnt the PIN in the file name you posted.
PIN = SKC

I have not confirmed them. Just noticed that it says PIN= right in the file

Yes that is the PIN or SKC that i get but don't work. Can you, please check?

In this dumps the PIN is also on Byte 32 and 33 like on ECU's?
« Last Edit: May 26, 2013, 11:32:37 AM by Karl Martin » Logged
f1torrents
Sr. Member
****

Karma: +17/-1
Offline Offline

Posts: 303
« Reply #13 on: May 26, 2013, 12:25:23 PM »
Quote from: Karl Martin on May 26, 2013, 11:24:52 AM


In this dumps the PIN is also on Byte 32 and 33 like on ECU's?

No it is not in the same spot
Logged
f1torrents
Sr. Member
****

Karma: +17/-1
Offline Offline

Posts: 303
« Reply #14 on: May 26, 2013, 12:47:11 PM »
where did you get those PIN's?

Did you get them or were they provided.?

What tool was used?
Logged
Pages: [1] 2
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 15, 2024, 03:48:13 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.019 seconds with 18 queries. (Pretty URLs adds 0s, 0q)