Pages: [1]
Author Topic: RS4 MAF MAX VALUE?  (Read 5888 times)
leolux
Jr. Member
**

Karma: +4/-0
Offline Offline

Posts: 27


« on: May 24, 2013, 05:32:22 PM »

Hi Guys,

what are the max Value on 4,9904V in g/s with the stock housing? Is it possible thats it 519.866g/s ?

Thx for answer.

Leo
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #1 on: May 24, 2013, 05:42:05 PM »

MLHFM maximums:

(1996.1-200) (kg / hr) = 498.92 g / sec (RS4)
1213.1 (kg / hr) = 336.97 g / sec (S4)

[edited to reflect MLOFS]
« Last Edit: May 25, 2013, 10:04:59 AM by nyet » Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
leolux
Jr. Member
**

Karma: +4/-0
Offline Offline

Posts: 27


« Reply #2 on: May 25, 2013, 04:42:29 AM »

THx for answer, but are you shure? because the MAF start at 0V with 34.611 G/S??? what ar with airmass under this value? The ting is i want adpat the MAF for my 1.8t in my car (ME3.8.2). All is no problem the only think is my MAF curve starts at 0 g/s and the RS4 not. At beginn i have think thet are offeset and i have ask here in forum.

Leo
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #3 on: May 25, 2013, 10:05:12 AM »

yea. forgot about mlofs. edited original post.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
leolux
Jr. Member
**

Karma: +4/-0
Offline Offline

Posts: 27


« Reply #4 on: May 27, 2013, 04:18:48 PM »

yea. forgot about mlofs. edited original post.

THX Man how you have get the offset? i dont have the sensor here, because i have think to read the voltage on no flow and reflekt that on the maps. Of example if the sensor are on no airflow an volatge of 1.05V set the airflow value on this point in MAP on 0.

THX for helping.

other question i have compare the courves from s3 1.8t MAF with the RS4 it looks verry simular carecteristic. Are there the same sensor only other diamater?
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #5 on: May 27, 2013, 05:08:22 PM »

MLOFS
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 16 queries. (Pretty URLs adds 0s, 0q)