First off, I am a new member to this awesome website and have been reading like mad. A lot to retain
Well I am trying to create a new key for my 03 Audi A4. I cannot for the life of me find the SKC - and not because I do not know where to look... my car is not letting me. I apologize if I do not have all the info on the first post - if you need anything please let me know.
So for starters I gave 95040 a shot...
C:\Program Files\Nefarious\NefMoto>ME7EEPROM --OBD -b 9600 -r -p 2 95040.bin
ME7_EEPROM v1.40
COM: 2, Baud Rate: 9600
Opening COM2 ... OK
Initiating communication ... FAIL. (error=0x50001)
Closing COM2
C:\Program Files\Nefarious\NefMoto>ME7EEPROM --OBD -r -p 2 95040.bin
ME7_EEPROM v1.40
COM: 2, Baud Rate: 10400
Opening COM2 ... OK
Initiating communication ... FAIL. (error=0x50101)
Closing COM2
C:\Program Files\Nefarious\NefMoto>ME7_95040 --OBD -r -p 2 95040.bin
Ver: 1.31
Com Port: 2
Baud Rate: 10400
Opening COM2 ... OK
Initiating communication ... FAIL. (error=0x01)
Closing COM2
And when I try to use Nefmoto in general...
Standard...
Reading all ECU info.
Starting diagnostic session.
Unable to properly start diagnostic session, attempting to continue with current undefined session.
Negotiating communication timings.
Successfully changed to new communication timings.
0% complete.
20% complete.
40% complete.
60% complete.
80% complete.
100% complete.
Read 5 ECU info entries:
0x92, System Supplier ECU Hardware Number: 0261208346
0x94, System Supplier ECU Software Number: 1037368621
0x91, Vehicle Manufacturer ECU Hardware Number: 0x0D, 8E0909059 , 0xFF
0x9B, Calibration Date: 8E0909559R , 0020, 0x0300416F, 0x0B832378, 0x5658, 3.0L V6/5V , G
0x9C, Calibration Equiment Software Number: 0x00010100
Restoring Windows sleep mode.
Programming....
Reading all ECU info.
ECU reports programming session preconditions have been met.
Negotiating communication timings.
Successfully changed to new communication timings.
Starting diagnostic session.
Start diagnostic session failed, ECU reports security access is required.
Reading all ECU info failed.
100% complete.
Restoring Windows sleep mode.
It seems like
ECU reports security access is required happens a lot. In Programing, in Logging... I cant seem to win. The ECU will not allow me in, let alone be able to get the SKC out of it. I am using a KII cable of off ebay and can use VCDS without any problems. And when I run Vag Commander it gives me a error saying cannot automatically detect EEPROM.
I would rather stay away from taking the ECU out. I'm not real comfortable with benching it. So any help in getting Nefmoto or the 95040 would be amazing!!
