NefMoto > Technical > Tuning > Can`t reach more then 1 bar boost on 2tfsi
Pages: [1]
« previous next »
Author Topic: Can`t reach more then 1 bar boost on 2tfsi  (Read 8922 times)
melodic
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 23
« on: June 04, 2013, 07:51:01 AM »
I have audi a4 2tfsi 2007 b7. I`ve modified IOP and IRL, but the requested boost is only 1 bar. Where is the limiter?
Logged
krazykev
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3
« Reply #1 on: June 04, 2013, 07:55:43 AM »
These are limited because of the side mount intercoolers..

Compare values with say a stock Mk5 gti file, say around the area before LDR
Logged
melodic
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 23
« Reply #2 on: June 05, 2013, 03:44:18 AM »
actual boost is often 1,3 bar. But I want requested boost to be 1,3 bar.
LDRXN was also changed in my file.
« Last Edit: June 05, 2013, 07:49:43 AM by melodic » Logged
majorahole
Sr. Member
****

Karma: +16/-4
Offline Offline

Posts: 302
« Reply #3 on: June 05, 2013, 08:28:10 AM »
is this your ori file, or the modified one?
Logged
SRT
Newbie
*

Karma: +2/-0
Offline Offline

Posts: 18
« Reply #4 on: June 05, 2013, 10:59:00 PM »
 LDPBN Wink
Logged
SVSPORT
Full Member
***

Karma: +9/-0
Offline Offline

Posts: 104
« Reply #5 on: June 06, 2013, 11:37:16 AM »
Quote from: SRT on June 05, 2013, 10:59:00 PM
LDPBN Wink
Yes, change this map,also!
1CEFC0
Axis=1CA487
Logged
phila_dot
Hero Member
*****

Karma: +173/-11
Offline Offline

Posts: 1709
« Reply #6 on: June 06, 2013, 12:21:22 PM »
LDPBN only limits desired load when there is an error in one of the many temp inputs
Logged
Rick
Hero Member
*****

Karma: +63/-4
Offline Offline

Posts: 704
« Reply #7 on: June 06, 2013, 12:35:40 PM »
Not in MED9
Logged
phila_dot
Hero Member
*****

Karma: +173/-11
Offline Offline

Posts: 1709
« Reply #8 on: June 06, 2013, 12:40:51 PM »
Huh...weird that they would change that.

When is it active in MED9?
Logged
Rick
Hero Member
*****

Karma: +63/-4
Offline Offline

Posts: 704
« Reply #9 on: June 06, 2013, 12:46:21 PM »
All the time! 

It had be stumped at one point I can tell you...  US software usually has it set to 1 bar, European 1.25bar.  It's a true boost limiter, not pressure ratio or load.

Rick
Logged
phila_dot
Hero Member
*****

Karma: +173/-11
Offline Offline

Posts: 1709
« Reply #10 on: June 06, 2013, 05:09:31 PM »
Well that's convenient for guys like us, but really makes no sense in a torque based system.

Motronic is built around not caring what target boost pressure. Target boost pressure is determined to be whatever it takes to meet the torque request/specified load without sacrificing emissions and self preservation criteria.

Pressure ratio limitation makes perfect sense considering, but boost pressure?

Well, that was nice of them Cheesy
Logged
melodic
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 23
« Reply #11 on: June 06, 2013, 11:45:14 PM »
Quote from: SRT on June 05, 2013, 10:59:00 PM
LDPBN Wink
It is works! Thank you guys.
Logged
amd is the best
Sr. Member
****

Karma: +11/-5
Offline Offline

Posts: 269
« Reply #12 on: June 07, 2013, 06:42:58 PM »
Off topic I apologize, but could you please share dslgrad and dlofs from you bin file?
Logged
2012 Golf TDI
2001 Audi A4 2.8 30v Supercharged
1991 Audi 200 20v
melodic
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 23
« Reply #13 on: June 29, 2013, 08:55:24 AM »
I didn`t change it.
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 27, 2024, 10:49:05 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.022 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)