Pages: 1 [2]
Author Topic: Methanol as a Primary Fuel  (Read 12551 times)
s5fourdoor
Hero Member
*****

Karma: +33/-3
Offline Offline

Posts: 617


« Reply #15 on: June 11, 2013, 05:41:03 PM »

subbed
« Last Edit: June 11, 2013, 09:04:20 PM by nehalem » Logged
Mantis
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 36


« Reply #16 on: June 11, 2013, 08:47:32 PM »

Looking good so far, haven't made any revisions yet, fueling looks pretty good with just a factor of 1.65 applied to KRTE, first FATS run is 3.15s.

No CF's, 20deg at 6500, I could definitely ask for more

Logged
pablo53
Full Member
***

Karma: +5/-1
Offline Offline

Posts: 94


« Reply #17 on: June 13, 2013, 11:34:51 PM »

This on your A6?  I was just reading through that build thread wondering when it would come alive.   3.15 fats... damm.  When do you get spool?   
Logged
Mantis
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 36


« Reply #18 on: June 14, 2013, 06:24:29 AM »

This isn't my A6, this is my S4, running FT's and after 2 revisions I am down to 3.08 back to back.

The A6 should be alive sometime this year, I have taken a step back from it and treat it as a project car, it will be done when it's done

Logged
Mantis
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 36


« Reply #19 on: June 14, 2013, 08:25:38 AM »

For those interested, running M70 blend my IDC is 82% max, when bumping up to M75 blend my IDC is at 100%, this is a 4 bar base.  I plan to take it back down to M70


Edit

I messed with KRTE and TVUB and ended up closer to 80% IDC on my M75, also spraying w/m on top, WOT lambda is 0.7619, AFR is 6.45, shows 11.2 on my gauge
« Last Edit: June 14, 2013, 12:56:21 PM by Mantis » Logged
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.022 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)