Pages: [1] 2
Author Topic: .ols for 8L0906018M ?  (Read 23202 times)
dantt
Full Member
***

Karma: +0/-1
Offline Offline

Posts: 148


« on: June 12, 2013, 02:33:44 AM »

Does Some of you have .ols for my ecu 8L0906018M  ?
Logged
ddillenger
Hero Member
*****

Karma: +637/-21
Offline Offline

Posts: 5640


« Reply #1 on: June 12, 2013, 10:06:33 AM »

I posted an 018F ols, what's the problem? I looked at the files, they're nearly identical?
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
dantt
Full Member
***

Karma: +0/-1
Offline Offline

Posts: 148


« Reply #2 on: June 13, 2013, 12:22:37 AM »

hi ddillenger ,
thanks for your patience
maybe I'm doing something wrong.
the file and 'similar to the 86%.
when I import the file I choose "continue and import project data from above". the project above is the 'ols that you posted; so I can see the various maps divided by id
but if I open the maps do not have valid values

I'm clearly wrong to compare it, isn't it?
Logged
ddillenger
Hero Member
*****

Karma: +637/-21
Offline Offline

Posts: 5640


« Reply #3 on: June 13, 2013, 12:28:18 AM »

You need to line the maps up side by side using compare, offset the projects until they match, and transfer the map data one by one.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
dantt
Full Member
***

Karma: +0/-1
Offline Offline

Posts: 148


« Reply #4 on: June 13, 2013, 12:36:43 AM »

thanks again,
so de differenti is only in the offset?
ti ringrazio
ora provo ad identificare le mie mappe!! Smiley
Logged
ddillenger
Hero Member
*****

Karma: +637/-21
Offline Offline

Posts: 5640


« Reply #5 on: June 13, 2013, 12:39:54 AM »

The primary difference is in the offset, but it's not like the entire file is offset the same amount. You'll have to play with it until it lines up. Use your best judgement. It really is easy.

If you're lazy, you can TRY flashing the 018F. It should crossflash just fine.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
dantt
Full Member
***

Karma: +0/-1
Offline Offline

Posts: 148


« Reply #6 on: June 13, 2013, 01:14:17 AM »

The primary difference is in the offset, but it's not like the entire file is offset the same amount. You'll have to play with it until it lines up. Use your best judgement. It really is easy.

If you're lazy, you can TRY flashing the 018F. It should crossflash just fine.

perfect I think I understand.
i'd prefer to work a little more and use my file Smiley thanks again!
Logged
dantt
Full Member
***

Karma: +0/-1
Offline Offline

Posts: 148


« Reply #7 on: June 13, 2013, 10:16:27 PM »

good morning ddillenger,
Hi
I used the WinOLS function  "connect windows" to connect the maps of the 2 projects.
by selecting ols ids that interest me I found the correspondence in my project.
I manually copied the properties of the .ols tables in the properties of the tables that I have identified in my .ori

the values ​​in the tables are the same but the values on the axes no Sad
Can I change the values ​​on the axes manually? 
would  this be to change the values ​​in the original map?
Logged
ddillenger
Hero Member
*****

Karma: +637/-21
Offline Offline

Posts: 5640


« Reply #8 on: June 13, 2013, 10:30:33 PM »

When you were comparing and copying did you get a prompt that winOLS found a matching axis at a different location? What version do you have?
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
dantt
Full Member
***

Karma: +0/-1
Offline Offline

Posts: 148


« Reply #9 on: June 14, 2013, 12:04:31 AM »

When you were comparing and copying did you get a prompt that winOLS found a matching axis at a different location? What version do you have?
hi ddillenger,
I tried again the process now on the PC's work  and here I have the same values ​​on the axes too ( it works fine!! ).
this evening I'll try again on my pc
Logged
dantt
Full Member
***

Karma: +0/-1
Offline Offline

Posts: 148


« Reply #10 on: June 15, 2013, 12:44:07 AM »

I was wrong to use the option organization: 2d Inverse
now works fine Smiley
Logged
dantt
Full Member
***

Karma: +0/-1
Offline Offline

Posts: 148


« Reply #11 on: June 19, 2013, 01:03:49 PM »

bad news
I can not create my ols.

I'd like to find the following maps:
krkte (found)
KVB (not found)
fkkvs (not found)
kfmirl (found, recognized as a possible map automatically)
kfmiop (found)
kfzwop (found)
kfzwop2 (found)
ldrxn (not found)
ldrxnzk (not found)

how can I do to find the "not found" maps ?
thanks
Logged
ddillenger
Hero Member
*****

Karma: +637/-21
Offline Offline

Posts: 5640


« Reply #12 on: June 19, 2013, 01:31:36 PM »

LDRXN 1C022
LDRXNZK 1C064
KVB 19A9C
FKKVS 1B028
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
dantt
Full Member
***

Karma: +0/-1
Offline Offline

Posts: 148


« Reply #13 on: June 19, 2013, 02:05:20 PM »

LDRXN 1C022
LDRXNZK 1C064
KVB 19A9C
FKKVS 1B028

thanks again for your help
I still have problems to transform these values ​​into the map.
I try to explain better with an example

now i know that LDRXN start from 1C022 and that includes the 16 successive values.
I've selected this exadecimal value, but how can i transform them into map?
Logged
ddillenger
Hero Member
*****

Karma: +637/-21
Offline Offline

Posts: 5640


« Reply #14 on: June 19, 2013, 02:08:53 PM »

Line up the start of the map in the 018F OLS with the start of the map in your OLS. Then, hit TRANSFER MAP, making sure to JUST transfer map structure, not data.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
Pages: [1] 2
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.019 seconds with 17 queries. (Pretty URLs adds 0s, 0q)