ME7 boot mode problems

Pages: [1]

« previous next »

Author

Topic: ME7 boot mode problems (Read 11229 times)

vwnut8392

Sr. Member

Karma: +19/-7
Offline

Offline

Posts: 271

	ME7 boot mode problems « on: February 23, 2011, 08:53:30 PM »

i've been tying to put an ME7.1 and an ME7.5 into boot mode but when i ground the pin suggested i get no response from the ECU when using nefmoto. im using a home made bench flashing cable i made OBD port. i take a 1K 1/4 watt resistor and solider it to the outermost pad that surrounds the ECU and touch the other end to the pin suggested on the flash chip of each ECU. tried just a straight ground and no luck either. am i missing something? there's alot of info out there about it but everyone is so vague when it's talked about. if i just power up the ECU its fine. any input would be great. thanks.


	Logged

setzi62

Full Member

Karma: +142/-0
Offline

Offline

Posts: 249

	Re: ME7 boot mode problems « Reply #1 on: February 24, 2011, 01:48:35 AM »

Quote from: vwnut8392 on February 23, 2011, 08:53:30 PM

i've been tying to put an ME7.1 and an ME7.5 into boot mode but when i ground the pin suggested i get no response from the ECU when using nefmoto.

You need to use a bootmode tool like Galetto or Minimon to talk with the ECU in bootmode.
"Normal" OBD tools talk to the ECU using the KWP2000 protocol, this is only possible when
the ECU is running normally.
At least it seems you brought the ECU successfully into bootmode, since the NefMoto flasher
could no longer connect after you grounded the bootpin Wink


	Logged

vwnut8392

Sr. Member

Karma: +19/-7
Offline

Offline

Posts: 271

	Re: ME7 boot mode problems « Reply #2 on: February 24, 2011, 05:22:48 PM »

sweet man, thanks for the info. i didnt know there was a specific cable needed to read it after boot mode.


	Logged

Tony@NefMoto

Administrator
Hero Member

Karma: +132/-4
Offline

Offline

Posts: 1389

2001.5 Audi S4 Stage 3

	Re: ME7 boot mode problems « Reply #3 on: February 24, 2011, 06:33:48 PM »

Galletto is fairly simple, but you need a Galletto cable.

MiniMon will work with any dumb cable, but you have to setup all of the config options yourself.


	Logged

Remember you have to log in if you want to see the file attachments!
Info or questions, please add to the wiki: http://www.nefariousmotorsports.com/wiki
Follow NefMoto developments on Twitter: http://twitter.com/nefmoto

vwnut8392

Sr. Member

Karma: +19/-7
Offline

Offline

Posts: 271

	Re: ME7 boot mode problems « Reply #4 on: February 24, 2011, 11:08:28 PM »

where do i have minimon? i ordered a galletto 1260 cable. thanks guys.


	Logged

ArgDub

Full Member

Karma: +60/-1
Offline

Offline

Posts: 202

	Re: ME7 boot mode problems « Reply #5 on: February 25, 2011, 08:15:16 AM »

Quote from: vwnut8392 on February 24, 2011, 11:08:28 PM

where do i have minimon? i ordered a galletto 1260 cable. thanks guys.

Google is your friend

http://www.nefariousmotorsports.com/forum/index.php?topic=105.msg2414#msg2414

http://www.infineon.com/dgdl?folderId=db3a3043133ffd30011343fd894b018d&fileId=db3a3043133ffd300113444e0b810219

http://www.infineon.com/dgdl/ap1601210_Bootstrap_Loader_IDB.pdf?folderId=db3a304313719f4f011372b30f58008a&fileId=db3a304318a6cd680118cb945a2140bc

http://www.perschl.at/minimon.html

http://www.infineon.com/cms/en/product/channel.html?channel=ff80808112ab681d0112ab6b50fe07c9


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 24, 2024, 06:35:17 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search