Pages: 1 2 3 [4]
Author Topic: swap inyectors RS4 in 2.0 TFSI .. calculate krkte ?  (Read 37712 times)
teobolo
Full Member
***

Karma: +24/-6
Offline Offline

Posts: 112


« Reply #45 on: May 06, 2018, 03:44:55 AM »

lower more krkte or lower pressure target to hpfp maps from 50bar to 30bar at idle .
Logged
brs
Full Member
***

Karma: +3/-11
Offline Offline

Posts: 61


« Reply #46 on: May 06, 2018, 09:43:06 AM »

lower more krkte or lower pressure target to hpfp maps from 50bar to 30bar at idle .

Hpfp target is 30bar at idle. FKKVS reduced ~%20 but LTFT still part -16 / idle -6
Really strange
Logged
brs
Full Member
***

Karma: +3/-11
Offline Offline

Posts: 61


« Reply #47 on: May 09, 2018, 02:13:41 AM »

Hi all,

Now part load trim a little good with KRKATE But idle is still rich, any idea about idle ?

BTW if who can help me ,i am ready to pay for a perfect injector scale
Logged
mister t
Sr. Member
****

Karma: +74/-18
Offline Offline

Posts: 343


« Reply #48 on: May 15, 2018, 11:21:57 AM »

KRKATE 0x1D9BC8 ~0,03322  Huh

Checked against DAMOS and address confirmed at 1D9BC8

Here's the map pack for that area if that helps
Logged
Khendal
Full Member
***

Karma: +9/-8
Offline Offline

Posts: 226


« Reply #49 on: April 04, 2019, 02:37:19 PM »

I'd like to know the name of these maps ... can anyone tell me please?

The 3rd should be FKKVS , but the 1st and 2nd? KFBHO.... ?




no response yet at this question Cheesy

1) Recalibrate injectors lag
2) Recalibrate injection angle
3) Recalibrate injection pulsation correction map (final injection correction map) - Used for fine tune everything

2) Maps  usually are KFWBHO1SLE-MX-WE (initial angles)
3) Should be FKKVS
1) But the first one ? Which one is injectors lag?  and which other maps are needed to check ?  Huh
Logged
vanrhj
Full Member
***

Karma: +0/-5
Offline Offline

Posts: 55


« Reply #50 on: June 08, 2022, 12:45:21 AM »

Ok so the RS4 injector is about 29% lager than the stock injector for 2.0tfsi BWA?
Logged
birchbark506
Sr. Member
****

Karma: +11/-11
Offline Offline

Posts: 414


« Reply #51 on: September 22, 2022, 09:25:42 AM »

has anyone done AKS tuning injectors for the ea113 drop in high flow. i got KRKATE set to 0.024792

they say there injectors are 85 ML @ 5 bars for 15 seconds
Logged
Pages: 1 2 3 [4]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)