Pages: [1]
Author Topic: LTFT issues on narrowband TT225's  (Read 9826 times)
Matt@GTS
Jr. Member
**

Karma: +1/-19
Offline Offline

Posts: 26


« on: July 08, 2013, 07:54:56 AM »

I have noticed that narrowband TT225's have LTFT issues. A lot of binaries have LTFT's disabled via NOLRA. When enabled, they don't work properly, which must mean there is something wrong with the adaption settings.

Has anyone else run into this?
Logged
Carsinc
Sr. Member
****

Karma: +17/-2
Offline Offline

Posts: 447


« Reply #1 on: July 08, 2013, 07:33:17 PM »

Well I can tell you that 034 motorsports and unitronic get around all this by converting to wideband front 02,
Its pretty easy and a hell of alot better.
Logged
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024



« Reply #2 on: July 08, 2013, 08:15:05 PM »

Well I can tell you that 034 motorsports and unitronic get around all this by converting to wideband front 02,
Its pretty easy and a hell of alot better.

Moar details? Smiley
Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
Carsinc
Sr. Member
****

Karma: +17/-2
Offline Offline

Posts: 447


« Reply #3 on: July 08, 2013, 09:21:52 PM »

This is about a mafless file but the diy is the same and the tuning is up to you,
http://forums.vwvortex.com/showthread.php?4620923-DIY-How-To-Wideband-02-harness-conversion-for-support-of-Pressure-Based-Tunes
Logged
Matt@GTS
Jr. Member
**

Karma: +1/-19
Offline Offline

Posts: 26


« Reply #4 on: July 08, 2013, 09:23:41 PM »

Well I can tell you that 034 motorsports and unitronic get around all this by converting to wideband front 02,
Its pretty easy and a hell of alot better.
I know this.

I would just like to fix the LTFT's instead.
Logged
Carsinc
Sr. Member
****

Karma: +17/-2
Offline Offline

Posts: 447


« Reply #5 on: July 08, 2013, 10:03:25 PM »

I think the rear 02sensor could be what is causeing the ltft problems your talking bout.
I started a thread awhile back discussing rear 02s and ltft.
Logged
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024



« Reply #6 on: July 08, 2013, 10:03:45 PM »


Thanks
Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
Matt@GTS
Jr. Member
**

Karma: +1/-19
Offline Offline

Posts: 26


« Reply #7 on: July 09, 2013, 12:41:42 PM »

I think the rear 02sensor could be what is causeing the ltft problems your talking bout.
I started a thread awhile back discussing rear 02s and ltft.
Not rear O2.

I confirmed that binaries with working LTFT's have 08 for NOLRA while the ones that do not have working LTFT's have 04 for NOLRA.
Logged
Carsinc
Sr. Member
****

Karma: +17/-2
Offline Offline

Posts: 447


« Reply #8 on: July 09, 2013, 01:02:07 PM »

I have a feeling you understand this better than I do, I'm just trying to bring up a lil known problem with crazy stuff rear 02s can do.
Logged
player
Full Member
***

Karma: +1/-5
Offline Offline

Posts: 130


« Reply #9 on: July 11, 2013, 11:13:15 AM »

i converted to wideband and delete rear 02 but ...still ltft is 9%...and the engine runs like crap...i just have to unplug the lambda for it to run allmost normal..
Logged
vagenwerk
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 182


« Reply #10 on: July 11, 2013, 12:57:03 PM »

check for leaks, check maf for proper numers, check lambda, and also check for any stored codes
Logged
Matt@GTS
Jr. Member
**

Karma: +1/-19
Offline Offline

Posts: 26


« Reply #11 on: July 13, 2013, 08:23:01 PM »

i converted to wideband and delete rear 02 but ...still ltft is 9%...and the engine runs like crap...i just have to unplug the lambda for it to run allmost normal..
Hardware issue
Logged
chiptuner123
Full Member
***

Karma: +0/-8
Offline Offline

Posts: 50



« Reply #12 on: October 20, 2019, 10:45:27 AM »

do you know if the ecu read the LAMBDA sensor at full load?
I run AFR 14.00 2000rpm to 6800rpm.I do nkt know if problem is the sensor or other?
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12255


WWW
« Reply #13 on: October 20, 2019, 11:23:03 AM »

do you know if the ecu read the LAMBDA sensor at full load?
I run AFR 14.00 2000rpm to 6800rpm.I do nkt know if problem is the sensor or other?

Good thing you posted logs
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.067 seconds with 18 queries. (Pretty URLs adds 0s, 0q)