Pages: [1] 2 3
Author Topic: Revo`ed ME7.5 Problems after logging??  (Read 19622 times)
TCSTigersClaw
Sr. Member
****

Karma: +15/-6
Offline Offline

Posts: 353



« on: July 08, 2013, 01:46:09 PM »

I know its a little off topic regarding to Tuning ,but there are a lot of ME7.5 specialists here,please if anyone has any idea whats going on with my case.

I had the wierdist thing today.I was logging a Revo`ed Ibiza FR with VCDS then ME7logger and then I just atempted to read it with nefmoto (really I dont know why,I know they can`t be read).
I also did a clear ECU faults with VCDS and an EPC reset (block 060).
When I fire the car again,it didnt boost at all..
I have an SPS3 ,so I plugged it in I switched to Mode 2 (Tune) again , fired it up.It boosts a lot higher but not as it used to be (1.3bars instead of 1.45) the EPC pedal was very slow.
I decieded to do again a block 060 reset ,and I had an error.After some attempts and when I switched to Mode 1 (stock) to be able to do it,the adaptation was successfull but still the car doesnt boost and the throttle is still slow..

What happened ?I know just logging cant affect an ECU ,was a bad thing I  tried to read it with Nefmoto?I have tried again.Was it just luck and I have problems with EPC ?

P.S.  I had no response from block 112 either from the begining of the logging when the car felt right .Just mentioning
Logged

VAG cars newbie tuner Smiley
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640


« Reply #1 on: July 08, 2013, 01:56:24 PM »

Read the eeprom, see if the contents have been changed.

You DID backup your eeprom right? I mean if my tune were locked to a specific file that takes 30 seconds to save, I'd definitely make sure to back it up.

See if the eeprom has NEFMTO near the bottom.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
TCSTigersClaw
Sr. Member
****

Karma: +15/-6
Offline Offline

Posts: 353



« Reply #2 on: July 08, 2013, 02:03:29 PM »

No I have never touched or attempted to  read Revo with an other way .I just have a spare ECU to try my tunes in my car. Undecided
Just connecting with nefmoto and attempting to read could lead to such a thing?

I think its time to attempt to write over the revo file.I screwd up big time Smiley
« Last Edit: July 08, 2013, 02:08:52 PM by TCSTigersClaw » Logged

VAG cars newbie tuner Smiley
prj
Hero Member
*****

Karma: +1072/-482
Offline Offline

Posts: 6039


« Reply #3 on: July 08, 2013, 04:30:23 PM »

How about reconnecting the boost hose you most likely blew off or made a hole in? Wink
Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
Carsinc
Sr. Member
****

Karma: +17/-2
Offline Offline

Posts: 447


« Reply #4 on: July 08, 2013, 07:14:02 PM »

You need to turn revo settings back on, You need to be a revo dealer or have a sps maybe.
As a dealer I know what just happened, Yes I think its in the eeprom but unless he read it
first I don't know how you could tell.
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640


« Reply #5 on: July 08, 2013, 07:41:45 PM »

Rule number one when dealing with aftermarket software (that you want to keep). Make a backup of the eeprom.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
Carsinc
Sr. Member
****

Karma: +17/-2
Offline Offline

Posts: 447


« Reply #6 on: July 08, 2013, 07:49:15 PM »

Rule number one when dealing with aftermarket software (that you want to keep). Make a backup of the eeprom.
this is true, but in this case any revo dealer can turn it back on. If they charge it should not be more than twenty dollars.
I'll post a read from a good revo tuned car, If we want to try to figure it out.
The eeprom should be good for revo on.
« Last Edit: July 08, 2013, 07:55:28 PM by Carsinc » Logged
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024



« Reply #7 on: July 08, 2013, 10:14:45 PM »

Do you know what address are modified with the SPS and when it reverts back to stock with a power failure? I have an old 1st gen SPS unit I may be able to map some changes. Should be two positions with 0-9 for number of possibilities.
Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
TCSTigersClaw
Sr. Member
****

Karma: +15/-6
Offline Offline

Posts: 353



« Reply #8 on: July 08, 2013, 10:23:02 PM »

I have an SPS3 switch ,it wouldnt do a throttle adaptation, so I had to put it on stock (mode 1) .
What I dont understand if how the eeprom changed,just attempting to read it ? is that possible..?

Carsinc .VWaudigy ,it never reverts back to stock even without a battery for a month.But just in case I changed again the settings (HB9 T7) but no luck.

Didilinger you are absolutely right  ,I never expected a typical logging run would end up like this.


Logged

VAG cars newbie tuner Smiley
Carsinc
Sr. Member
****

Karma: +17/-2
Offline Offline

Posts: 447


« Reply #9 on: July 08, 2013, 10:31:18 PM »

I had one do this when I read that eeprom bin I posted.
They do it most common when the alternator fails and car is driven to low voltage.
Logged
TCSTigersClaw
Sr. Member
****

Karma: +15/-6
Offline Offline

Posts: 353



« Reply #10 on: July 08, 2013, 10:47:45 PM »

I really wish its hardware related.But such a coinsidence ? I will report back.

In case I want Revo out  usining SPS3 to switch to stock mode and just flashing will be enough ?
Logged

VAG cars newbie tuner Smiley
Carsinc
Sr. Member
****

Karma: +17/-2
Offline Offline

Posts: 447


« Reply #11 on: July 08, 2013, 11:00:56 PM »

I'm not sure I understood?
I think you may be able to turn revo back on by switch maps with your sps. If that does not work a revo dealer
can do it real easy no refash. Under the dealer setting there is a option to turn on or off the revo.
Logged
TCSTigersClaw
Sr. Member
****

Karma: +15/-6
Offline Offline

Posts: 353



« Reply #12 on: July 08, 2013, 11:15:01 PM »

I mean make the ECU completely stock Smiley
Logged

VAG cars newbie tuner Smiley
Carsinc
Sr. Member
****

Karma: +17/-2
Offline Offline

Posts: 447


« Reply #13 on: July 08, 2013, 11:43:42 PM »

no the revo stock file is not a stock file at all.
Logged
TCSTigersClaw
Sr. Member
****

Karma: +15/-6
Offline Offline

Posts: 353



« Reply #14 on: July 08, 2013, 11:47:39 PM »

I know you are right , what I am saying is if I dont find a solution and I want to revert it to stock , before flashing an .ori  I would revert back to stock with SPS3 also ,since it messes with eeprom also ,and I have no dumb of my eeprom (stupid I know)
Logged

VAG cars newbie tuner Smiley
Pages: [1] 2 3
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.034 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)