Can't read flash file

Pages: 1 [2]

« previous next »

Author

Topic: Can't read flash file (Read 19978 times)

David_8

Newbie

Karma: +0/-0
Offline

Offline

Posts: 18

	Re: Can't read flash file « Reply #15 on: July 18, 2013, 04:05:28 PM »

Tried my rosstech cable too.... No cigar !!!


	Logged

David_8

Newbie

Karma: +0/-0
Offline

Offline

Posts: 18

	Re: Can't read flash file « Reply #16 on: August 01, 2013, 03:40:39 AM »

Got it too read after, I did by switching the ignition as the confirmation screen comes up just before the read.


	Logged

metyoo

Newbie

Karma: +0/-5
Offline

Offline

Posts: 3

	Re: Can't read flash file « Reply #17 on: September 05, 2013, 01:06:06 PM »

I also do have problem with ECU dump as fast/full read/write options are disable.
Nefmoto connected via obd with KWP2000 protocol, I can read ECU info an that is all I can. Nothing more.
What is going on?


	Logged

TCSTigersClaw

Sr. Member

Karma: +15/-6
Offline

Offline

Posts: 353

	Re: Can't read flash file « Reply #18 on: September 06, 2013, 10:16:16 AM »

Try a cheap blue china cable.They are better than the china VCDS cables.
Also original Rosstech can`t work even with "dump mode" at least I cant do it.

Fast init is for registered users only you need a license


	Logged

VAG cars newbie tuner

David_8

Newbie

Karma: +0/-0
Offline

Offline

Posts: 18

	Re: Can't read flash file « Reply #19 on: September 13, 2013, 05:55:05 AM »

I got mine working every time both read and write by pulling the cluster fuse.

It seems since I did that it works without pulling it each time now.


	Logged

coreyj03

Full Member

Karma: +10/-5
Offline

Offline

Posts: 173

	Re: Can't read flash file « Reply #20 on: September 13, 2013, 07:04:44 AM »

make a bench harness then try to read it , then try to read it in boot mode


	Logged

metyoo

Newbie

Karma: +0/-5
Offline

Offline

Posts: 3

	Re: Can't read flash file « Reply #21 on: November 13, 2013, 07:00:54 AM »

Quote from: TCSTigersClaw on September 06, 2013, 10:16:16 AM

My cable is cheap blue chinese sh....
Tonight I`ll try to use cable with elm327 chipset and I`ll let you know.


	Logged

oldcarguy85

Full Member

Karma: +15/-1
Offline

Offline

Posts: 247

	Re: Can't read flash file « Reply #22 on: November 13, 2013, 09:20:11 AM »

Quote from: David_8 on September 13, 2013, 05:55:05 AM

I got mine working every time both read and write by pulling the cluster fuse.

It seems since I did that it works without pulling it each time now.

i can never successfully read/write my 1.8t ECU (AWW motor) without pulling cluster fuse. Its the cluster fuse closest to the firewall. If the gauges stop working but clock stays on you pulled the right fuse.


	Logged

Pages: 1 [2]

« previous next »

Jump to:

Navigation

Personal Tools

November 26, 2024, 02:17:37 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search