boot mode with ST10

Pages: [1]

« previous next »

Author

Topic: boot mode with ST10 (Read 4661 times)

lulu2003

Full Member

Karma: +11/-1
Offline

Offline

Posts: 242

	boot mode with ST10 « on: August 11, 2013, 09:15:09 AM »

Hi,

are there bigger differences to read ME7 1 MB flash 29f800 with ST10 processor instead of normale old c167 in Boot mode?
I am not sure if I make an error by setting boot pin(s) or if my tool (MPPS) has problems with it? Currently cannot cross check with C167.

If yes, which tools instead of byte shooter , CMD etc. can do that?


	Logged

ddillenger

Hero Member

Karma: +641/-21
Offline

Offline

Posts: 5640

	Re: boot mode with ST10 « Reply #1 on: August 11, 2013, 10:57:24 AM »

That's the CAN-bus ME7.1.1 correct? If so, big differences getting into bootmode.


	Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM

lulu2003

Full Member

Karma: +11/-1
Offline

Offline

Posts: 242

	Re: boot mode with ST10 « Reply #2 on: August 11, 2013, 02:00:35 PM »

I think I have a software problem:
meanwhile I can get it into boot mode, at least I managed to read 1MB external flash and there is an option to read the st10 flash.
but writing my 1MB file into the external flash does not work after erasing the flash...


	Logged

vwaudiguy

Hero Member

Karma: +53/-37
Offline

Offline

Posts: 2024

	Re: boot mode with ST10 « Reply #3 on: May 28, 2015, 10:41:51 PM »

Did you ever figure out your issue, lulu?


	Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 14, 2024, 10:30:33 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search