Anyone has an idea why?



Logger worked fine but suddenly it interrupts logging after 2-3seconds.

ECU is 1ML 906 032 A

(Seat Leon Cupra R, BAM engine)

Any help and hints would be highly appreciated :-)

BR

Alex

Brilliant plan because car wont start then anymore (Immobilizer) 

Sorry for the late reply, was quite busy the last days :-(

However, as sudden as the error occured, it also went away by itself again.

After trying to "click to log" several times, the logger works as it should again, without changing anything :-)

Another plug for this solution- 9 years later
I was getting this same error intermittently - I've been chasing baud rates, sampling rates, variable count, etc.  All i had to do was unplug my cluster fuse (#11 on mk4 jetta) and I can log like a mf now. 
many thanks!

And I recommend using VisualME7Logger or DrageEngineAnalyzer on top of ME7Logger- because running around without an instrument cluster is unsettling when you're trying to do WOT pulls...

Change 3 places in flash?  what do you mean?
I try to turn on ignition, start logger, start car.  After 5-10 sec it crashes with 0x04 error.  If I pull my cluster fuse, I can log forever.  But i can't log vehicle speed or gear, which are important.