Preferred method of increasing threshold for positive deviation detection

Pages: 1 [2]

« previous next »

Author

Topic: Preferred method of increasing threshold for positive deviation detection (Read 18766 times)

userpike

Hero Member

Karma: +22/-1
Offline

Offline

Posts: 763

	Re: Preferred method of increasing threshold for positive deviation detection « Reply #15 on: August 26, 2013, 12:10:42 PM »

Quote from: ddillenger on August 25, 2013, 11:25:02 PM

So I have the underboost sorted by setting LDRXN to something a bit more reasonable for such a laggy turbo. I'm still getting code P0234 (overboost), mainly when letting off after a run. Looks like the N249 being missing may be the issue here, but I need to eliminate it. I have FF'd KLDLUL (or what I believe to be 27F47, 8x1), and DLUL (1 byte), but still getting the code. Thoughts?

could you put a resistor in for the n249 to see if that is indeed where your DTCs are coming from? or just leave it plugged in without the vacuum lines attached.

Why do you need to eliminate the n249? I thought they were a good thing.

You couldn't just manipulate the diverter valve maps to open sooner or stay open longer or something? (I haven't messed with them personally so I don't really know)

maybe the turbo is so huge that it needs 2 diverter valves? jk

ldrxnzk?


« Last Edit: August 26, 2013, 12:28:00 PM by userpike »	Logged

ddillenger

Hero Member

Karma: +641/-21
Offline

Offline

Posts: 5640

	Re: Preferred method of increasing threshold for positive deviation detection « Reply #16 on: August 26, 2013, 12:56:23 PM »

The N249 has been coded out via ESKONF and TMDLDUV to disable plausibility diagnosis. That's not the issue, rather the problem is the boost spike that results from not having it to open the diverter.


	Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM

userpike

Hero Member

Karma: +22/-1
Offline

Offline

Posts: 763

	Re: Preferred method of increasing threshold for positive deviation detection « Reply #17 on: August 26, 2013, 04:15:42 PM »

Quote from: ddillenger on August 26, 2013, 12:56:23 PM

The N249 has been coded out via ESKONF and TMDLDUV to disable plausibility diagnosis. That's not the issue, rather the problem is the boost spike that results from not having it to open the diverter.

KFLDRQ0,1,2 maybe?

could you adjust the DV preload spring rate to open at the spike but stay closed for target boost?


« Last Edit: August 26, 2013, 04:17:38 PM by userpike »	Logged

Bische

Sr. Member

Karma: +25/-4
Offline

Offline

Posts: 397

	Re: Preferred method of increasing threshold for positive deviation detection « Reply #18 on: August 28, 2013, 12:18:27 PM »

Quote from: ddillenger on August 24, 2013, 10:16:22 AM

Bische: I checked the map posted, my file has different values (Factor 5*x).

Also, is the axis right before it? Factor? I assume it's HPA (the axis) not U/Min like I've seen.

DLUL is deviation detection in general, not just for overboost like KFDLULS?

Mine is scaled for 5120, so mine is 10*x and those values are the stock ones. Axis before map.

I have not looked at the code as I have not had any problems with deviation after correcting this map, and my understanding is that it covers deviation in general -both positive and negative.

What exact code are you getting? I have a feeling you are poking in the wrong place..


	Logged

ddillenger

Hero Member

Karma: +641/-21
Offline

Offline

Posts: 5640

	Re: Preferred method of increasing threshold for positive deviation detection « Reply #19 on: August 28, 2013, 12:21:05 PM »

Currently, P0234.

The axis is HPA, factor?


	Logged

Bische

Sr. Member

Karma: +25/-4
Offline

Offline

Posts: 397

	Re: Preferred method of increasing threshold for positive deviation detection « Reply #20 on: August 28, 2013, 08:18:22 PM »

hPa, factor 20*x for 5120, 10*x stock scaling.

What turbo is on there? WG setup?


	Logged

Bische

Sr. Member

Karma: +25/-4
Offline

Offline

Posts: 397

	Re: Preferred method of increasing threshold for positive deviation detection « Reply #21 on: August 28, 2013, 08:29:36 PM »

Here you go


	Logged

ddillenger

Hero Member

Karma: +641/-21
Offline

Offline

Posts: 5640

	Re: Preferred method of increasing threshold for positive deviation detection « Reply #22 on: August 28, 2013, 08:40:40 PM »

Quote from: Bische on August 28, 2013, 08:29:36 PM

Here you go

Thanks Bische, address is what I had, my axis was incorrect, but I suppose that's irrelevant. Even with KLDLUL FF"d I get P0234. I ended up modifying the LDR timers and it's yet to throw a code.

As for the turbo, it's a GT2871 with a .86AR hotside. Doesn't spool until 5k+.


	Logged

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12270

	Re: Preferred method of increasing threshold for positive deviation detection « Reply #23 on: August 28, 2013, 10:34:32 PM »

Quote from: ddillenger on August 28, 2013, 08:40:40 PM

Even with KLDLUL FF"d I get P0234. I ended up modifying the LDR timers and it's yet to throw a code.

WHOA. Ok. I thought it was just me, but i had the same issue in me7.1 mbox... nothing worked until i messed with the timers.


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

aysix

Jr. Member

Karma: +12/-0
Offline

Offline

Posts: 37

	Re: Preferred method of increasing threshold for positive deviation detection « Reply #24 on: August 28, 2013, 11:10:51 PM »

Quote from: ddillenger on August 28, 2013, 08:40:40 PM

GT3071. Not a silly GT2871.


	Logged

Silly Rabbit 6 speed A6

Bische

Sr. Member

Karma: +25/-4
Offline

Offline

Posts: 397

	Re: Preferred method of increasing threshold for positive deviation detection « Reply #25 on: August 31, 2013, 01:00:00 AM »

Mismatch deluxe Cheesy

Never encountered overboost code on liftoff spike though, sounds strange actually.


	Logged

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12270

	Re: Preferred method of increasing threshold for positive deviation detection « Reply #26 on: August 31, 2013, 09:51:46 AM »

Quote from: Bische on August 31, 2013, 01:00:00 AM

Mismatch deluxe Cheesy

Never encountered overboost code on liftoff spike though, sounds strange actually.

Well DLUL is only for underboost (positive deviation) anyway isn't it?

on the 2.7t the two paths are very very different at least..


	Logged

Pages: 1 [2]

« previous next »

Jump to:

Navigation

Personal Tools

November 26, 2024, 05:33:31 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search