Pages: [1]
Author Topic: Recommended Books on Reverse Engineering  (Read 37918 times)
Tony@NefMoto
Administrator
Hero Member
*****

Karma: +132/-4
Offline Offline

Posts: 1389


2001.5 Audi S4 Stage 3


« on: March 13, 2011, 05:38:47 PM »

All of the links below will take you to the product page for the book on Amazon.com.

This is a great book for people new to reverse engineering hardware. This book covers everything from how to remove surface mount chips from circuit boards, to reverse engineering encryption systems.
Hacking the Xbox: An Introduction to Reverse Engineering
« Last Edit: March 13, 2011, 05:40:19 PM by Tony@NefMoto » Logged

Remember you have to log in if you want to see the file attachments!
Info or questions, please add to the wiki: http://www.nefariousmotorsports.com/wiki
Follow NefMoto developments on Twitter: http://twitter.com/nefmoto
phila_dot
Hero Member
*****

Karma: +173/-11
Offline Offline

Posts: 1709


« Reply #1 on: October 29, 2011, 01:00:25 PM »

I finally finished reading The Ida Pro Book by Chris Eagle. I recommend this book to anyone using Ida. I would say the book is for good for beginners, but a decent understanding of programming and reverse code engineering is required. Honestly, I will likely read it again after I get a better understanding of the subject.

This books gives a basic description and application of all of the capabilities of Ida Pro. Just when Chis Eagle gets to information that directly applies to our application, he refers the reader to Andy Whittaker's site. In my opinion this book would be great for someone who already understands disassembly and wants to take full advantage of Ida.

The IDA Pro Book: The Unofficial Guide to the World's Most Popular Disassembler
« Last Edit: January 06, 2012, 02:53:42 PM by Tony@NefMoto » Logged
rayce
Full Member
***

Karma: +6/-0
Offline Offline

Posts: 66


« Reply #2 on: December 04, 2011, 11:29:49 PM »

The 8051/8052 Microcontroller - Architecture Assembly Language, and Hardware Interfacing should be on the list. It helps  to know how they move forward before you go in reverse.. Grin
Logged

04 TT 225BEA Quattro
68 T1 VW Street Rail 2.5 Turbo 18psi 1300lbs
lulu2003
Full Member
***

Karma: +11/-1
Offline Offline

Posts: 242



« Reply #3 on: March 26, 2012, 01:15:41 PM »

is the 8bit 8051/52 really close to the c16x family?
Logged
1gcrazy
Full Member
***

Karma: +0/-3
Offline Offline

Posts: 101


« Reply #4 on: June 22, 2012, 10:40:51 PM »

is the 8bit 8051/52 really close to the c16x family?
Anyone?Huh
Logged
prj
Hero Member
*****

Karma: +1072/-480
Offline Offline

Posts: 6035


« Reply #5 on: July 03, 2012, 07:06:22 AM »

No, it's not at all.
8051 is a lot closer to 80386 IMO from a pure disassembling perspective.
Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
NMS
Full Member
***

Karma: +6/-3
Offline Offline

Posts: 50


« Reply #6 on: October 02, 2012, 01:09:53 PM »

I recommend these guys because they were recommended by the people above, and now I recommend them myself.

Logged
jay woo
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 1


« Reply #7 on: May 19, 2013, 05:49:05 AM »

The xbox book is now available for free. http://nostarch.com/xboxfree
Logged
lulu2003
Full Member
***

Karma: +11/-1
Offline Offline

Posts: 242



« Reply #8 on: May 24, 2015, 04:53:20 AM »

Is Chris Eagle's IDAPro book 2nd edition a lot better than 1st edition 2008?
Logged
pryth
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3


« Reply #9 on: April 07, 2016, 03:15:05 AM »

All of the links below will take you to the product page for the book on Amazon.com.

This is a great book for people new to reverse engineering hardware. This book covers everything from how to remove surface mount chips from circuit boards, to reverse engineering encryption systems.
Hacking the Xbox: An Introduction to Reverse Engineering

Good read so far. I'm about half way through. My only problem is that he goes into HUGE detail on how to open the Xbox (explaining security bits and stuff), but when he gets to the interesting stuff like disassembling the boot ROM, he seems to skim over it really fast.

Doesn't feel like a book to me though (except for the intro, lol), more like an extremely detailed DIY project.

Logged
TijnCU
Hero Member
*****

Karma: +60/-4
Offline Offline

Posts: 690


flying brick


« Reply #10 on: April 07, 2016, 06:57:46 AM »

This is also a great source that can keep you up for nights  Smiley Free, online and 942 pages
Reverse Engineering for beginners

Or the lite version from the download page (downloadable in A4 or A5 format, 158 pages)
« Last Edit: April 07, 2016, 07:10:02 AM by TijnCU » Logged

turbojohan
Full Member
***

Karma: +5/-0
Offline Offline

Posts: 185


« Reply #11 on: January 17, 2017, 01:15:34 PM »

Logged
nighthunter
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 25


« Reply #12 on: October 30, 2018, 06:26:30 AM »

Anyone have the C167 book in digital version?
Logged
ktm733
Hero Member
*****

Karma: +18/-9
Offline Offline

Posts: 661



« Reply #13 on: September 21, 2023, 10:49:13 AM »

Anyone?
Logged
instantioc
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 11


« Reply #14 on: September 21, 2023, 06:09:36 PM »

Both good reads. Can be found online for free if you really look. I prefer to just buy them and read at the beach or whatever.

https://www.amazon.com/dp/1593278748

https://www.amazon.com/Car-Hackers-Handbook-Penetration-Tester/dp/1593277032
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.026 seconds with 17 queries. (Pretty URLs adds 0s, 0q)