Pages: [1]
Author Topic: Ols cant open a pre-tuned file?  (Read 5850 times)
AmIdYfReAk
Full Member
***

Karma: +9/-0
Offline Offline

Posts: 129


« on: March 15, 2011, 03:41:41 PM »

Anyone know a way around it?

I have other projects that can be a stand in for the "stock file" if needed.

attached below is a picture of the error when importing it.
Logged
carlossus
Sr. Member
****

Karma: +38/-0
Offline Offline

Posts: 394

Leon Curpa Stg1+


« Reply #1 on: March 15, 2011, 03:50:54 PM »

Open the tuned file with a hex editor, Search for all instances of "NO READ" and replace with what was at that address in the original (probably FF). Then open and correct checksums in Winols.
Logged
Tony@NefMoto
Administrator
Hero Member
*****

Karma: +130/-4
Offline Offline

Posts: 1389


2001.5 Audi S4 Stage 3


« Reply #2 on: March 15, 2011, 04:57:40 PM »

And this is why copy protecting ECU tunes is ridiculous...
Logged

Remember you have to log in if you want to see the file attachments!
Info or questions, please add to the wiki: http://www.nefariousmotorsports.com/wiki
Follow NefMoto developments on Twitter: http://twitter.com/nefmoto
AmIdYfReAk
Full Member
***

Karma: +9/-0
Offline Offline

Posts: 129


« Reply #3 on: March 15, 2011, 10:24:51 PM »

Open the tuned file with a hex editor, Search for all instances of "NO READ" and replace with what was at that address in the original (probably FF). Then open and correct checksums in Winols.

100% correct, There is a bunch of stuff plastered within the file.

Guess i need to start searching and stripping it.
Logged
carlossus
Sr. Member
****

Karma: +38/-0
Offline Offline

Posts: 394

Leon Curpa Stg1+


« Reply #4 on: March 16, 2011, 12:24:29 AM »

It should go without saying that you shouldn't use this info for evil.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.027 seconds with 16 queries. (Pretty URLs adds 0s, 0q)