Pages: [1]
Author Topic: Problem "windows can not install usb driver"  (Read 5839 times)
Gunzy
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 11


« on: September 10, 2013, 05:37:28 PM »

ok so I have extracted all the files from CDM file and go to update driver in the device manager so I select the CDM 20600 and it keeps telling me that windows was not able to install your usb2.0 serial.

I have VCDS and the cable Im using is a VAG KKL 409.1. I uninstalled the original drivers and it doesn't make a difference. Do I need to delete VCDS as well? Any help would be great. Thanks.
Logged
vdubnation
Turboman
Global Moderator
Sr. Member
*****

Karma: +49/-2
Offline Offline

Posts: 433


« Reply #1 on: September 11, 2013, 11:30:00 AM »

we can setup a remote session and i could peek around see whats going on.
Logged
Gunzy
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 11


« Reply #2 on: September 11, 2013, 05:28:00 PM »

Thanks I sent you an email.
Logged
vdubnation
Turboman
Global Moderator
Sr. Member
*****

Karma: +49/-2
Offline Offline

Posts: 433


« Reply #3 on: September 12, 2013, 08:39:49 PM »

OP has the older style Vag cable CH based not compatible with nefmoto just helped him out
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Online Online

Posts: 12268


WWW
« Reply #4 on: September 12, 2013, 08:45:16 PM »

OP has the older style Vag cable CH based not compatible with nefmoto just helped him out

Unfortunately, there are a lot of these still floating around ebay..
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 17 queries. (Pretty URLs adds 0s, 0q)