Pages: [1]
Author Topic: Acceleration pump  (Read 4656 times)
itemonsale
Full Member
***

Karma: +1/-1
Offline Offline

Posts: 59


« on: September 18, 2013, 07:13:59 PM »

I am looking for a map called Acceleration Fuel map which mention on this website http://forums.vwvortex.com/showthread.php?5935270-UnOfficial-Eurodyne-Maestro-Tuning-Handbook
What is happening to  my car ( 8E0919518F) would not rev if I request more than 70% throttleat low RPM (1800-2500) until it reach to very high RPM(4300rpm) it seem like I need to bump up the Acceleration fuel map. I had the same issue with my AEM EMS 2jz which fixed the problem. can anyone help me to find the map?
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640


« Reply #1 on: September 18, 2013, 07:29:23 PM »

The name of the map they're referring to is KFBAKL. I highly doubt that's your issue.

But, in the 518F, sw 363670, it's located at 1931F, 7x9 with axis of temperature 182C3 and UPM 18203.
« Last Edit: September 18, 2013, 07:36:34 PM by ddillenger » Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
itemonsale
Full Member
***

Karma: +1/-1
Offline Offline

Posts: 59


« Reply #2 on: September 21, 2013, 10:18:21 PM »

you are right, it is actually my cat is melting.
Logged
itemonsale
Full Member
***

Karma: +1/-1
Offline Offline

Posts: 59


« Reply #3 on: September 23, 2013, 03:19:00 PM »

ddillenger,  Would you mind to help me look up one last table **Timing Correction For Air Temp**  & **Timing Vs. Coolant Temp** . Thank you in advnace
« Last Edit: September 23, 2013, 03:21:05 PM by itemonsale » Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 17 queries. (Pretty URLs adds 0s, 0q)