Pages: [1]
Author Topic: leon cupra r xdf  (Read 5519 times)
adeyspec
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 131


« on: October 16, 2013, 12:01:32 PM »

I have pulled this map from my new (new to me) leon cupra r (bam 225 engine), was told it was re-mapped but the xdf i have doesnt seem to line up? i fitted an 80mm tip and now im getting maf signal too high so would like to take a look. I replaced the maf thinking it might be faulty with a brand new item and still get the same fault code. Not played for about 6 months with any ecu so need to get my head back around it again. If any one could help i would be very great full. thanks in advance

adey

Logged
adeyspec
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 131


« Reply #1 on: October 16, 2013, 01:03:26 PM »

and just to confirm if i could (like i said ive not tinkered for a while) if i just set KFMLDMX to the maximum to get rid of the maf signal to high fault? that's if i can find it in my map.
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640


« Reply #2 on: October 16, 2013, 01:15:08 PM »

Log your MAF on a 3rd gear pull before you start maxing diagnostic functions.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
adeyspec
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 131


« Reply #3 on: October 16, 2013, 01:19:32 PM »

im on a 6 speed box, would 4th be preferred? ill pull some tomorrow and let you know, only happened after fitting a bigger turbo intake pipe and airfilter.
Logged
adeyspec
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 131


« Reply #4 on: October 17, 2013, 04:33:00 AM »

2 pulls from today

if you need them in a different format let me know, ive cut out as much crap as possible.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 19 queries. (Pretty URLs adds 0s, 0q)