Pages: [1]
Author Topic: Security lockout countdown running on ME7.5 (MKIV GTI)  (Read 4781 times)
GWerks
Full Member
***

Karma: +3/-0
Offline Offline

Posts: 66


« on: October 19, 2013, 07:51:33 AM »

Forgot to check the checksums, can someone tell me what pin I need to ground on the ECU to get it into bootmode? The ECU is in the car.

Thank you very much,
GWerks
Logged
GWerks
Full Member
***

Karma: +3/-0
Offline Offline

Posts: 66


« Reply #1 on: October 21, 2013, 04:43:35 AM »

I have been trying to ground pin 24 on the 800BB chip and and Galletto says BOOT MODE INACTIVE, am I doing something wrong?
Logged
maZer.GTi
Full Member
***

Karma: +68/-6
Offline Offline

Posts: 246


« Reply #2 on: October 21, 2013, 06:51:59 AM »

I have been trying to ground pin 24 on the 800BB chip and and Galletto says BOOT MODE INACTIVE, am I doing something wrong?

Ground the Pin only for about 2-3 Seconds, and then remove gnd from pin.
Logged
GWerks
Full Member
***

Karma: +3/-0
Offline Offline

Posts: 66


« Reply #3 on: October 21, 2013, 11:39:13 AM »

Tried it on the bench, held it for 2-3 seconds...still says BOOT MODE INACTIVE. HALPPP
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640


« Reply #4 on: October 21, 2013, 01:22:26 PM »

Bootmode:

Ensure ECU power is OFF. Ground pin 24. Power up ecu. Continue to keep pin 24 grounded for an additional 10 seconds. Remove ground from pin 24.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 17 queries. (Pretty URLs adds 0s, 0q)